![]() |
|
#1
|
|||
|
|||
![]()
Assign yourself as #1 they will follow you as long as your plane is ok.
You can only assign yourself to one plane , if you chose another the checkbox jumps to that plane. Last edited by Longbone; 08-26-2012 at 01:34 AM. |
#2
|
|||
|
|||
![]()
Thanks all!
Well, I did assign myself as #1, but they still didn't follow me. The did, however, fly to the next waypoint, which makes sense. Guess I should just be a better pilot and immediately after take-off, fly to the next waypoint(s). I was just hoping there was a way to get those in my flight to actually stick with me. Act as wingmen, as it were. I'll try the other method of having a second flight on the runway with me, and I guess assign them to cover me? Thanks, Coog |
#3
|
||||
|
||||
![]() Quote:
__________________
GigaByteBoard...64bit...FX 4300 3.8, G. Skill sniper 1866 32GB, EVGA GTX 660 ti 3gb, Raptor 64mb cache, Planar 120Hz 2ms, CH controls, Tir5 |
#4
|
|||
|
|||
![]()
Try setting at least 1 more waypoint after the takeoff with the setting "normal flight"...
__________________
AMD Penom ll 6x 1055T Processor 2.8 GHz // 8GB Ram // XFX Radeon HD 7870 Black Edition DD (2048 MB Memory DDR5, GPU 1055MHz) // Windows 7 Professional 64 Bit Version Saitek x52 // Saitek Throttle Quadrant // Saitek Pro Flight Rudder Pedals // Track IR 5 |
#5
|
|||
|
|||
![]()
Sorry don´t understand this behaviour
![]() which patch version are you running? I´ve missions with more then 2 waypoints, set to normalfly and they will follow me everywhere running ver.15950 PS.if possible attach mission to have a look at. Last edited by Longbone; 08-28-2012 at 08:02 PM. |
#6
|
||||
|
||||
![]() Quote:
If there are waypoints AI will always follow them, its up to the leader to be there too. They will even crash into the terrain if the waypoints are not realistic to the aircrafts capability in shedding/gaining speed and loosing/gaining altitude. ![]()
__________________
GigaByteBoard...64bit...FX 4300 3.8, G. Skill sniper 1866 32GB, EVGA GTX 660 ti 3gb, Raptor 64mb cache, Planar 120Hz 2ms, CH controls, Tir5 |
![]() |
|
|