|
|
|||||||
| Technical threads All discussions about technical issues |
|
|
Thread Tools | Display Modes |
|
#4
06-27-2012, 08:18 AM
|
||||
|
||||
I recommend that you read the posts linked above (if German is not one of your strengths use google translate and pester me with questions afterwards
 . If it is one of your strengths you may ask any question anyway  )."dedicated power supply": No, the 5V 100mA provided by USB are quite sufficient for the LED backlight (5 LEDs at 20mA for each of the two BUs). That's one of the reasons I used the BU836As: The BU836X does not have pins to grab these 5V from. "looks like cooling slots": No, that are two self made plug-fields for the button matrixes of the BU836As (see Bodnar's site for details). I've used the BU836As rather than BU836Xs because with 72 buttons and 16 axes cableing becomes a space problem (=144 + 48 wires). With the A's button matrix it's just 7 wires for every six buttons. Artist Edit: Orthography
__________________
Ceterum censeo the mixture axis should be supported in IL-2 1946' DeviceLink. ------------------------------------------------------------- 
Last edited by Artist; 06-27-2012 at 09:59 AM. 
|
|
|
Threaded Mode