Some more drawings of the FW190C

[T}{OR]

Originally Posted by koivis

Air from intake goes to turbo, turbo blows air into a two-stage, variable geometry supercharger, air goes to cylinders (I assume it had direct injection). Exhaust gases go trough three "blowdown" turbines between the cylinder banks (one for each 8 cylinders = 2 banks), then continues towards the back to go turn the aforementioned turbosupercharger. Probably, after this point, the exhaust gases don't have anything more to give...

The blowdown turbines are mechanically connected to crankshaft, in this case adding some 700 free horsepower. Of course, there is also the two-stage supercharger, and all this most likely needs whole lotta intercooling and other extra piping. I could draw a picture of that, but it's late, and I think that would take some time.

The reason for "added" complexity:

http://en.wikipedia.org/wiki/Turbo-compound_engine

It was realized that in many cases the power produced by the simple turbine was approaching that of the enormously complex and maintenance-intensive piston engine to which it was attached. As a result, turbo-compound aero engines were soon supplanted by turboprop and turbojet engines.