problem to see enemies at 5km

[Crepuscules]

Originally Posted by albx

DOT is only the distance you can see the dot not the icons:
COLOR 2.500 = at what distance you see the color if you have icons enabled
RANGE 0.005 = at what distance you see the range if you have icons enabled
TYPE 3.500 = at what distance you see the type (bf109, spit, fw190, etc.) if you have icons enabled
ID 0.005 = at what distance you see the ID if you have icons enabled
NAME 0.005 = at what distance you see the Player Name if you have icons enabled

ok , i copy here all my RCU

@set fast off
@set echo on
@set alias on
@set history 20

@alias a alias
@a h history
@a s show

@file settings.rcu

mp_dotrange FRIENDLY DOT 18.000 COLOR 2.500 RANGE 0.005 TYPE 3.500 ID 0.005 NAME 0.005

mp_dotrange FOE DOT 18.000 COLOR 2.500 RANGE 0.005 TYPE 3.500 ID 0.005 NAME 0.005
timeout 60000 file settings.rcu

it s ok ?

[albx]

Originally Posted by Crepuscules

ok , i copy here all my RCU

@set fast off
@set echo on
@set alias on
@set history 20

@alias a alias
@a h history
@a s show

@file settings.rcu

mp_dotrange FRIENDLY DOT 18.000 COLOR 2.500 RANGE 0.005 TYPE 3.500 ID 0.005 NAME 0.005

mp_dotrange FOE DOT 18.000 COLOR 2.500 RANGE 0.005 TYPE 3.500 ID 0.005 NAME 0.005
timeout 60000 file settings.rcu

it s ok ?

no

unzip the file i have attached in your IL-2 installation folder.Everytime you'll begin a new flight, open the console command (SHIFT+TAB) and type fr then enter then type fo then enter. At this time you can close the console command (SHIFT+TAB) and you'll see your icons at 25km (my settings are at 25km, you can change it editing the rcu file)

let me know

[kimosabi]

Originally Posted by Untamo

Not true.

When using (for example) a 1280*800 game res on a 2560*1600 native res monitor leads into that every "game pixel" is drawn as 4 "actual pixels" as the smaller res image is stretched over the same monitor area.

Even using a 75% of the native resolution gives you this effect. One game pixel is shown as one fully colored pixel and the adjacent pixels being "blurred". I use this on my 30" 2560*1600 monitor (75% == 1920*1200). Works well for me.

-Untamo

The amount of pixels used by the game stays the same. Should have specified that, but you are correct. No matter how you see it, the pixels used by the game are smaller, and the whole game will become blurrier when lowering the resolution like that. It's all a matter of taste ofcourse.

[Crepuscules]

Originally Posted by albx

no

unzip the file i have attached in your IL-2 installation folder.Everytime you'll begin a new flight, open the console command (SHIFT+TAB) and type fr then enter then type fo then enter. At this time you can close the console command (SHIFT+TAB) and you'll see your icons at 25km (my settings are at 25km, you can change it editing the rcu file)

let me know

ok, thanks

Is it CRT = 2?
and what is somewhat automate this process?

[rollnloop]

Is it CRT = 2?

It is host controlled, you will use the host settings online, not yours.

[albx]

Originally Posted by rollnloop

It is host controlled, you will use the host settings online, not yours.

exactly, it works only for offline

[Crepuscules]

DOT for offline work, thank you.
For the online is what someone has another idea for me to see further than 5km? a friend of mine lane at 15km, I copied his conf.ini but for me it's 5km: (