Quote:
Originally Posted by zapatista
skoshi,
how fast is the hd read access on the ssd drive ?
sata is in the usually in the range of 100-150 mb/sec (burst speed), and 70 to 120 average read (my sata drive runs at 117 burst and 80 average for ex)
a good free proggy to benchmark it with is hdtach ( http://www.simplisoftware.com/Public...request=HdTach)
would be interesting to see what the sd drive does in a modern pc.
|
Hi, tried to download HDTask, but it doesn't run under windows 7 64bit.
Using HT Tune Pro 4.01 my SATA II SSD drive measured a transfer rate of Minimum 136.9 MB/s (right at the begining of the test, most of the other lows were over 150 MB/s), Maximum of 209.5 MB/s and an average of 178.5 MB/s. It had a Access time 0f 0.1ms, and a burst rate of 211.7MB/s.
Trying to fit a useful system on 64GB drive is very hard! It fills up to fast!!!!
Gnomie, Hi! You could be right, I didn't test IL2 under just windows 7 without the SSD. But all up It was all a move in a positive direction.
Cheers!