Nvidia and AA

[KG26_Alpha]

Assuming you are running under Open GL and not Dx

Try these settings

[Render_OpenGL]
TexQual=3
TexMipFilter=1
TexCompress=0
TexFlags.UseDither=0
TexFlags.UseAlpha=0
TexFlags.UseIndex=0
TexFlags.PolygonStipple=0
TexFlags.UseClampedSprites=0
TexFlags.DrawLandByTriangles=1
TexFlags.UseVertexArrays=1
TexFlags.DisableAPIExtensions=0
TexFlags.ARBMultitextureExt=1
TexFlags.TexEnvCombineExt=1
TexFlags.SecondaryColorExt=1
TexFlags.VertexArrayExt=1
TexFlags.ClipHintExt=0
TexFlags.UsePaletteExt=0
TexFlags.TexAnisotropicExt=0
TexFlags.TexCompressARBExt=1

TexFlags.TexEnvCombine4NV=1
TexFlags.TexEnvCombineDot3=1
TexFlags.DepthClampNV=1
TexFlags.SeparateSpecular=1
TexFlags.TextureShaderNV=1

HardwareShaders=1

Shadows=2
Specular=2
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
VisibilityDistance=3

Sky=2
Forest=2
LandShading=3
LandDetails=2
LandGeom=2
TexLarge=1
TexLandQual=3
TexLandLarge=1

VideoSetupId=17
Water=3
Effects=1
ForceShaders1x=0

PolygonOffsetFactor=-0.15
PolygonOffsetUnits=-3.0

[Qpassa]

Hi Alpha:
Will the settings of my conf.ini be better if I change something?

TexQual=3
TexMipFilter=3
TexCompress=0
TexFlags.UseDither=0
TexFlags.UseAlpha=0
TexFlags.UseIndex=0
TexFlags.PolygonStipple=0
TexFlags.UseClampedSprites=0
TexFlags.DrawLandByTriangles=0
TexFlags.UseVertexArrays=1
TexFlags.DisableAPIExtensions=0
TexFlags.ARBMultitextureExt=1
TexFlags.TexEnvCombineExt=1
TexFlags.SecondaryColorExt=1
TexFlags.VertexArrayExt=1
TexFlags.ClipHintExt=0
TexFlags.UsePaletteExt=0
TexFlags.TexAnisotropicExt=0
TexFlags.TexCompressARBExt=1

TexFlags.TexEnvCombine4NV=0
TexFlags.TexEnvCombineDot3=1
TexFlags.DepthClampNV=0
TexFlags.SeparateSpecular=1
TexFlags.TextureShaderNV=0

The other are =

[capt. windh]

Originally Posted by KG26_Alpha

Assuming you are running under Open GL and not Dx

Try these settings

Roger that Alpha. I´ll try it out and get back.

/Johan

[KG26_Alpha]

Originally Posted by Qpassa

Hi Alpha:
Will the settings of my conf.ini be better if I change something?


The other are =

Hi

The settings I posted are for Nvidia

You have an ATI by the look of it.

[Flanker35M]

S!

Got today the MSI 480GTX for test. Ran quickly IL-2 Black Death and must say the card is good.

Results I got were the following at 1920x1200, 32-bit, V-Sync Off etc.

Maximum: 316fps Minimum: 37fps Average: 125fps

Still need to set and tweak as setting this Supersampling to 8x for example brought IL-2 to a crawl. But will test more, and the AA works, just override application setting and set whatever you want.

[capt. windh]

Originally Posted by Flanker35M

But will test more, and the AA works, just override application setting and set whatever you want.

Umm.... That´s kind of the issue we are discussing in this thread... That some of us (I at least) are not able to get AA to work....



@Alpha: Tried your settings, and it looks the same. And still no response to any changes made in Nvidia.

[Flanker35M]

S!

I am using the latest WHQL's from nVidia and they work just fine. Did a profile where I set settings I desired and tested on IL-2. No problems at all.

To Alpha. Why do you have bilinear texture filtering and no anisotropic filter in on in your conf.ini? Lines TexMipFilter=1 and TexAnisotropicExt=0. Also why have the DrawLandByTriangles=1 when this was for older cards to get more performance..if I recall right. I use 0. Or do you override settings with Control Panel thus these selections?

[KG26_Alpha]

Originally Posted by capt. windh

Umm.... That´s kind of the issue we are discussing in this thread... That some of us (I at least) are not able to get AA to work....



@Alpha: Tried your settings, and it looks the same. And still no response to any changes made in Nvidia.

What operating system are you using ?

If Win7 Turn off UAC and try again.

[KG26_Alpha]

Originally Posted by Flanker35M

S!

I am using the latest WHQL's from nVidia and they work just fine. Did a profile where I set settings I desired and tested on IL-2. No problems at all.

To Alpha. Why do you have bilinear texture filtering and no anisotropic filter in on in your conf.ini? Lines TexMipFilter=1 and TexAnisotropicExt=0. Also why have the DrawLandByTriangles=1 when this was for older cards to get more performance..if I recall right. I use 0. Or do you override settings with Control Panel thus these selections?

Those are not my settings but default NV ones for all cards.

[capt. windh]

Originally Posted by kg26_alpha

what operating system are you using ?

If win7 turn off uac and try again.

xp....


I really wonder why this is not working... Setting the global settings to AA override, like you said, should do the trick... But it doesn´t..