![]() |
|
IL-2 Sturmovik The famous combat flight simulator. |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]()
I'm having some issues with getting AAA to fire consistently on the new maps. It's hit or miss. Not a particular AAA piece or placement. I've tried everything.
Any ideas? |
#2
|
|||
|
|||
![]()
Ditto on that! Same here. I just created a new dogfight mission and 'no' AAA will fire at all at the enemy or anybody.
I also created 2 Airstarts with the Runway 4 and Homebases as usual. One worked and the other started the aircraft only 50 feet above the ground... parked. When I started the engines and started moving, it went about 10 feet and fell to the ground in flames. I deleted that airstart and re-created it in the same location with the same results.. WBK |
#3
|
||||
|
||||
![]() Quote:
B
__________________
Another home-built rig: AMD FX 8350, liquid-cooled. Asus Sabretooth 990FX Rev 2.0 , 16 GB Mushkin Redline (DDR3-PC12800), Enermax 1000W PSU, MSI R9-280X 3GB GDDR5 2 X 128GB OCZ Vertex SSD, 1 x64GB Corsair SSD, 1x 500GB WD HDD. CH Franken-Tripehound stick and throttle merged, CH Pro pedals. TrackIR 5 and Pro-clip. Windows 7 64bit Home Premium. |
#4
|
|||
|
|||
![]()
I read a few comments about the Slovakia-Map concerning these issues. IIRC there's also a thread on the Zoo on page1 about this.
|
#5
|
|||
|
|||
![]()
It's with the Slovakia map. Beebop and I both have this problem. I started a thread at the zoo about 4.09 and the Slovakia map that turned into a discussion about this issue...
|
#6
|
||||
|
||||
![]()
OK, it was the Slovakia map I was thinking about myself. Is there a particular area which doesn't run AAA? I set up a night mission recently - with buckets of 88mm and searchlights along one of the river valleys that runs SW>NE. It works like a charm. However I did notice one odd fact: Although I was using the 88mm (German flak guns) the icons all showed up as Red and had to be altered manually to show Blue. I don't recall having to do that in previous versions.
__________________
Another home-built rig: AMD FX 8350, liquid-cooled. Asus Sabretooth 990FX Rev 2.0 , 16 GB Mushkin Redline (DDR3-PC12800), Enermax 1000W PSU, MSI R9-280X 3GB GDDR5 2 X 128GB OCZ Vertex SSD, 1 x64GB Corsair SSD, 1x 500GB WD HDD. CH Franken-Tripehound stick and throttle merged, CH Pro pedals. TrackIR 5 and Pro-clip. Windows 7 64bit Home Premium. |
#7
|
|||
|
|||
![]()
My dogfight map has airbases in the bottom/left (S/W) corner of the map at Nitra and Piestany. Neither base's artillary/aaa will fire at me. I even put Red AAA at the Blue Base and when I spawn at the blue base it won't fire at me.
|
#8
|
|||
|
|||
![]()
This must be in DF maps only because Papy Toa who writes a lot of oyur newer missions has no problem with getting flak to hit.. LMAO.
|
#9
|
|||
|
|||
![]()
Could some of you post your mission files so we can have a look at them.
Also, a common mistake amongst mission designers is that they place 'static objects' rather than 'artillery' for the flak emplacements. Ends up being a bunch of useless AAA batteries that do not fire.
__________________
Find my missions and much more at Mission4Today.com |
#10
|
|||
|
|||
![]()
IceFire has just answered my suggestion - Artillery must be selected for AA to work, not 'static AA objects'.
Also there is a properties box when you activate the artillery piece, it has a 'timeout' area for stopping AA fire for a certain period and a 'hold fire (m)' area - the number of minutes required. Double check that these box's have not been 'checked'? Both the normal 'Slovakia Map' and 'Bessarabia' maps work ok with artillery on my game version 4.09b1m DFLion |
![]() |
Thread Tools | |
Display Modes | |
|
|