Central MS FFB2 topic - repair, settings and mods

[Barman1942]

I recently bought a FFB2 off ebay and am using it with an X-52 throttle and Saitek pedals, but the stick is having some weird issues. It'll work normally the first time I run IL-2, but after a while the stick goes totally slack and only vibrates during stalls or weapon firing, but does not return to center. Sometimes when this happens pressing the main trigger will sharply center it, and while the trigger is pressed it seems like the force feedback is enabled, but it goes slack after depressed.

The stick will also sometimes work fine in Rise of Flight, but other times it will start to bounce when you pull it in any direction, like the sensors can't decide if it should center the stick or pull it in another direction. Is all this caused by driver issues, or did I just get a dud off ebay?

[KG26_Alpha]

Originally Posted by Barman1942

I recently bought a FFB2 off ebay and am using it with an X-52 throttle and Saitek pedals, but the stick is having some weird issues. It'll work normally the first time I run IL-2, but after a while the stick goes totally slack and only vibrates during stalls or weapon firing, but does not return to center. Sometimes when this happens pressing the main trigger will sharply center it, and while the trigger is pressed it seems like the force feedback is enabled, but it goes slack after depressed.

The stick will also sometimes work fine in Rise of Flight, but other times it will start to bounce when you pull it in any direction, like the sensors can't decide if it should center the stick or pull it in another direction. Is all this caused by driver issues, or did I just get a dud off ebay?

Clean the laser sensor holes top and bottom of the handle, on the inside,
you will see small holes that fill with skin and dirt from your hand.

When you place your hand on the handle the light should get brighter and dull when released, this tells you the sensor is working.











.

[Barman1942]

Originally Posted by KG26_Alpha

Clean the laser sensor holes top and bottom of the handle, on the inside,
you will see small holes that fill with skin and dirt from your hand.

When you place your hand on the handle the light should get brighter and dull when released, this tells you the sensor is working.
.

The sensors should be clean, I've checked each time to make sure the light is brighter when I'm holding the stick, but I'll give them a cleaning just in case. Thanks for the help.

[KG26_Alpha]

Have you re-calibrated it on your PC ?

[Barman1942]

Originally Posted by KG26_Alpha

Have you re-calibrated it on your PC ?

I have, it didn't seem to make much of a difference. The stick has been behaving a little more normally recently, but it sometimes still cuts out, and I've had it cut out once when I pulled the trigger.

[KG26_Alpha]

MSFFB2 Windows 8.1

No longer looses FFB when going to desktop and returning to the game.

[pencon]

I had a Logitech force pro stick just go dead on me , and after looking for a replacement and not finding any with FF I ended up buying a new used sidewinder ff2 . WOW! What a difference ! I can actually aim now . I was hating my Logitech and the elevator function was fading out on it . The Sidewinder is so much better of a stick with much much more feedback it's amazing . I was getting tired of my sims with the old stick but now it's gotten interesting once again . Way more finesse and way more range in movement with this stick . Worth every penny of the 120 I paid for it .