![]() |
|
#1
|
|||
|
|||
![]()
Hi Tintin
I think that you might be using a profile that I was using prior to the release of Luthiers code, I have since removed it, and am using Luthier's Code now, you will need to follow the new instructions for the new code in the link that I have posted here at the bottom of this post. What I do is this: - (1) Make sure that you have activated Sli in the Nvidia control panel and don't have one of your cards selected as "Physics" (in this panel I have selected "cpu" not "auto select") (2) Run Nvidia inspector, activate "Il2: Cliffs of Dover" in Nvidia Inspector by selecting it and clicking on "Apply Changes". Do this before starting C.o.D. (3) I also run EVGA Precision which shows how my cards are running (fps, temps on both cards, percentage of use both cards, etc.) You don't need to point anything to "Launcher" it will be found automatically. I suppose both your cards are the same model with the same V/ram (they won't work in Sli unless they are) they can be from different manufactures but must have the same V/ram. Remember that if you update your Drivers you will need to re-import the profile from where you saved it to back into Nvidia Inspector (because the Sli code was never officially activated by Nvidia, every time a new set of drivers is released and installed, the Il2: Cliffs of Dover profile will disappear from the List). See this link for installing Luthier's Sli Code: - http://forum.1cpublishing.eu/showthread.php?t=37316 Check this forum there is always good advise here (you may need to register): - https://forums.geforce.com/
__________________
Rick Asus M4N98TD-EVO AMD Phenom2 965 x 4 3.4gig 8gig DDR3 Ram 2x GTS 450 Sli (1gig each) 1Tb HDD Partitioned x 5 700w Coolermaster single rail P/S 52a Windows 7 64bit 19" Samsung 931BW monitor 1280 x 960 Resolution Last edited by RickRuski; 05-05-2013 at 09:48 PM. |
#2
|
|||
|
|||
![]()
I see to also be having the same issue, the profile has been saved in inspector ok but when I load the game the sli bar does not come on (it does for other games)
Any ideas where I am going wrong? |
#3
|
|||
|
|||
![]()
Hi Manta,
Sorry I have only just seen your post. If you have installed the profile correctly you should be ok. just one thought, have you recently updated your Nvidia drivers?. If you have, you have to reset your control panel Sli settings (these will have changed when you update your drivers). Make sure that you have "show Sli indicator bar" ticked in the 3D settings tab in Nvidia control panel. Here's a screen shot from my system with the bar enabled.
__________________
Rick Asus M4N98TD-EVO AMD Phenom2 965 x 4 3.4gig 8gig DDR3 Ram 2x GTS 450 Sli (1gig each) 1Tb HDD Partitioned x 5 700w Coolermaster single rail P/S 52a Windows 7 64bit 19" Samsung 931BW monitor 1280 x 960 Resolution Last edited by RickRuski; 07-21-2013 at 07:51 AM. |
#4
|
||||
|
||||
![]()
Just downloaded the recent Nvidia GEforce driver update, and am now trying to reinstall the IL2 cliffsofDover SLI code back into the list ... but am having problems. i ran the GeForce_SLI_Profile_Tool, dated 13th Oct 2012 from Nvidia and tried to export profiles but it crashed!
![]() Any help?
__________________
. ======================================== . .....--oOo-- --oOo-- HE-111 --oOo-- --oOo--..... . ======================================== -oOo- Intel i7-2600K (non-clocked) -oOo- GA-P67A -oOo- DF 85 full tower -oOo- 1000W corsair -oOo- 8 GB 1600Hz -oOo- 2 x GTX 580 1.5M (295.73) -oOo- 240 SSD -oOo- W7 64bit -oOo- PB2700 LED 2560 x 1440 6ms 60Hz -oOo- ======================================== Last edited by He111; 09-27-2013 at 06:26 AM. |
#5
|
|||
|
|||
![]()
He 111,
Have a look at this post. http://forum.1cpublishing.eu/showthread.php?t=26236 If you have updated the Nvidia drivers you will have to re import your saved profile. What you will need to do is this: - (1) install Nvidia inspector (if you have it installed already miss this step) (2) Install "Luthiers" Sli code (you can find it in my first post with instructions on how to do this) (3) It should then show as "Il2 Cliffs of Dover" in the Nvidia inspector profile list. (4) Then export the profile list to some where like "My Documents". This will give you a copy to import back into Nvidia inspector when you have an update of drivers. (As there is no official support from Nvidia for Cliffs of Dover in their Sli profiles you will need to do this every time you have a driver update) Hope this helps.
__________________
Rick Asus M4N98TD-EVO AMD Phenom2 965 x 4 3.4gig 8gig DDR3 Ram 2x GTS 450 Sli (1gig each) 1Tb HDD Partitioned x 5 700w Coolermaster single rail P/S 52a Windows 7 64bit 19" Samsung 931BW monitor 1280 x 960 Resolution |
#6
|
||||
|
||||
![]()
ummm, just downloaded latest version of NvidiaInspector, ran it, and there is no option for profile files ????
He111
__________________
. ======================================== . .....--oOo-- --oOo-- HE-111 --oOo-- --oOo--..... . ======================================== -oOo- Intel i7-2600K (non-clocked) -oOo- GA-P67A -oOo- DF 85 full tower -oOo- 1000W corsair -oOo- 8 GB 1600Hz -oOo- 2 x GTX 580 1.5M (295.73) -oOo- 240 SSD -oOo- W7 64bit -oOo- PB2700 LED 2560 x 1440 6ms 60Hz -oOo- ======================================== |
#7
|
|||
|
|||
![]()
He111,
On the page you show, come to the driver version line. At the right hand end you will see the square with the crossed emblem in it, click on that and it will open up the profile page. At the top of that page it will show the profile version currently in use (usually it will show "Global" unless you change it ). At the right hand end of the profile panel there is a small downward pointing arrow, click on that and it will show all the current Nvidia profiles in alphabetical order. Unless you have already installed Luthier's code there will be no "Il2 Cliffs of Dover" profile showing. If you have installed it, but have updated the Nvidia drivers and not re-imported the "saved" profile it will have disappeared from the profile list. As I have said, there is no official support from Nvidia for "Il2 Cliffs of Dover" so every time you update your drivers you must re-import the profile from where you have saved it (I have made a new folder in My Documents called "C.o.D. Sli profile" and that is where I exported the copied profile to so that I can re-import it back into Nvidia Inspector when necessary). Now comes the part that you will need to do. Install Luthier's Sli code. http://forum.1cpublishing.eu/showthread.php?t=37316 This post will tell you how to do this. Remember, save any changes you make at the right hand side of the profile page (Apply Changes). If you have done everything correctly you will then find "Il2 Cliffs of Dover" listed on the profile page below the two current Il2 official profiles. Open up the profiles list from the Profiles panel at the top of the page and select "Il2 Cliffs of Dover" , the profile will show the coding supplied by Luthier, once again apply changes. If you have trouble with this procedure I will be happy to help you.
__________________
Rick Asus M4N98TD-EVO AMD Phenom2 965 x 4 3.4gig 8gig DDR3 Ram 2x GTS 450 Sli (1gig each) 1Tb HDD Partitioned x 5 700w Coolermaster single rail P/S 52a Windows 7 64bit 19" Samsung 931BW monitor 1280 x 960 Resolution Last edited by RickRuski; 09-28-2013 at 09:58 PM. |
![]() |
Thread Tools | |
Display Modes | |
|
|