|
|
#8
09-01-2012, 02:19 PM
|
||||
|
||||
Things have suddenly speeded up around here, I ordered some buttons yesterday and they arrived today
 HURRAH!I made a slight mistake when drilling the holes in the case for the button but I was able to correct it (Well sort of) but its all going to be covered up anyway  So here is the button case with the buttons installed...  You can see the left button is a bit too far to the left, but luckily I was still able to get the nut and anti rotation washer on.  The two parrel lines are where the spitfire grip will be resting not the drilling location so while my drilling was not great it was not THAT bad  I have done some work on the button, filling the grip etc and tomorrow I will be finishing the button and casing and moving on to the brake lever. I would be doing some more work today but I just got a call, apparently we are starting drinking at four today  its such a hard life 
__________________
 Quote:
Gigabyte X58A-UD5 | Intel i7 930 | Corsair H70 | ATI 5970 | 6GB Kingston DDR3 | Intel 160GB G2 | Win 7 Ultimate 64 Bit |
MONITOR: Acer S243HL. CASE: Thermaltake LEVEL 10. INPUTS: KG13 Warthog, Saitek Pedals, Track IR 4. Last edited by JG52Krupi; 09-01-2012 at 02:26 PM. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode