![]() |
|
#1
|
|||
|
|||
![]()
okay, where should i put it then ?
|
#2
|
||||
|
||||
![]()
Also, most X52 users have found it best to set the ingame curve for pitch and roll to all 100%.
|
#3
|
|||
|
|||
![]()
I mapped drop-tank-release and bomb-release on the "Launch"-button with the safety-thing on the stick. Pressing Pinkie and the "Launch"-button is my bailout.
|
#4
|
||||
|
||||
![]()
@feuerfalke
when i start my pc the profile for my x52 is automatically loaded so i can see it on the display of the throttle. @bobby109 you have to have the latest drivers: ftp://ftp.saitek.com/pub/software/fu...ler_SD6_32.exe ftp://ftp.saitek.com/pub/software/fu...oftware_32.exe the bad thing is that you have to write a new profile as the new sw can´t use the old profiles.
__________________
Win 7/64 Ult.; Phenom II X6 1100T; ASUS Crosshair IV; 16 GB DDR3/1600 Corsair; ASUS EAH6950/2GB; Logitech G940 & the usual suspects ![]() |
#5
|
|||
|
|||
![]() Quote:
|
#6
|
||||
|
||||
![]()
not at this time, afaik they are working at one.
__________________
Win 7/64 Ult.; Phenom II X6 1100T; ASUS Crosshair IV; 16 GB DDR3/1600 Corsair; ASUS EAH6950/2GB; Logitech G940 & the usual suspects ![]() |
#7
|
|||
|
|||
![]()
okay
How have you set up your elevator trim in joycontrol? all 100s ? any deadzone or filtering ? |
#8
|
|||
|
|||
![]()
Hi!
Isn't there somewhere a guide for how to set up the X52 so most planes fly straight with that stick? I've noticed that all (well, at least the ones I've tested, about 20 or so) planes but most the russian and the japanese do not fly straight. I.e. the aileron always needs to be trimmed - quite a lot - since the planes just dip their right wing... That sounds pretty weird to me, but that's my experience. And many planes just react very slightly upon trimming, if at all... As I use my Saitek Av8r stick instead with e.g. Gladiator or Corsair, the planes go straight ahead without a fuzz... |
![]() |
Thread Tools | |
Display Modes | |
|
|