Catalyst 11.5 and IL-2 1946 problem

[albx]

Have somebody tried the catalyst 11.5 with IL-2 1946? I have an 6950 and with the latest drivers have very bad artifacts on the water near the land, flickering black boxes, with 11.4 it works ok.

regards
Alberto

[Mabroc]

I have the same problem with an 6950 too, the flickering and artifacts seem to dissapear if I disabled the AntiAliasing.

Im forcing 4xAA and 16xAnisotropic filter using an utility called RADEONPRO, it worked ok with 11.3 and 11.14, but with the latest 11.5a(hotfix) they seem to have broken something.

For now I just disabled the AA waiting for a solution

[Untamo]

S!

I've had a couple of bad freezes in IL-2 .. and Crysis, and some other games too with both 11.4 and 11.5 .. but it MIGHT have something to do with shader unlocking and overclocking the crap out of the 6950 .. Shall go back to factory bios and drop the clocks to see if it does it then.

-Untamo

[albx]

Originally Posted by Untamo

S!

I've had a couple of bad freezes in IL-2 .. and Crysis, and some other games too with both 11.4 and 11.5 .. but it MIGHT have something to do with shader unlocking and overclocking the crap out of the 6950 .. Shall go back to factory bios and drop the clocks to see if it does it then.

-Untamo

Overclocking is probably your problem, my 6950 is modded only in shaders unlocking, i didn't overclocked it. You should try modding your original bios, unlocking only the shaders.

regards

[Mabroc]

Same boat as "albx", only BIOS modded but only the shaders unlock applied, didnt touch the core and memory clock (just tried at first with overclocked settings some tests and all worked ok, but Im not so sure the memory can take it for long). Finished CRISIS 2 and PORTAL 2 without issues.

Il-2 1946 freezed on my (after hours online) a couple of times, but I think its only because this game is more NVIDIA friendly and after 10 years the ATI cards changed more than the competition in software drivers.

[ramstein]

when i get a new computer I will probably dump ati after 10 years... they just don't seem to do as well with flight sims as nvidia does... just very tired of the battle to get it all running good..

and yes, my computer is getting very outdated,, runs il-2 good, black shark maxed and ok, but not great.. but forget running cod...

[22GCT_PlaN]

I have also problem whit 11.5, pc crash when loading mision is 100%

[Untamo]

Originally Posted by albx

Overclocking is probably your problem, my 6950 is modded only in shaders unlocking, i didn't overclocked it. You should try modding your original bios, unlocking only the shaders.
regards

Well I put the original bios back to see for sure that the card itself isn't faulty, or did I brick it with my OCing .. Luckily it seems to work ok. Will try to just unlock next.

-Untamo

[Ze-Jamz]

Originally Posted by albx

Overclocking is probably your problem, my 6950 is modded only in shaders unlocking, i didn't overclocked it. You should try modding your original bios, unlocking only the shaders.

regards

Dont do it...

If your talking about flashing the bios up to a 6970 i suggest you revert back to stock, Im hearing some bad things regarding that procedure regarding the voltage control to the bios once flashed

[albx]

Originally Posted by Ze-Jamz

Dont do it...

If your talking about flashing the bios up to a 6970 i suggest you revert back to stock, Im hearing some bad things regarding that procedure regarding the voltage control to the bios once flashed

what are you talking about? I said to mod HIS bios to enable only the shaders, not to modify voltage and clock settings