![]() |
|
IL-2 Sturmovik: Cliffs of Dover Latest instalment in the acclaimed IL-2 Sturmovik series from award-winning developer Maddox Games. |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]() Quote:
removing the filter did give a very noticeable jump in fps which led to my posting above. I am now as sure as i can be that i bought enough rig to max this game out once it is properly utilizing all of my available hardware properly. ![]() |
#2
|
|||
|
|||
![]()
@bryan i have i920 12ram and radeon5850.
I have come to conclusion that in my case there is not much difference wheter i play on high or low settings. The game runs great when flying solo, problems occur in near distance dogfights. So i guess that at least in my case the problems are not in the hardware but within the game itself. There is some optimisation that needs to be done. Last edited by Devastat; 03-28-2011 at 08:03 AM. |
#3
|
|||
|
|||
![]() Quote:
![]() ![]() |
#4
|
|||
|
|||
![]()
Sorry Brian, I should of explained a bit.
Luthier mentioned in a post "I want to confirm that everything said here is true, we have implemented some drastic features for anti-epilepsy protection which are affecting FPS and killing SLI support." So I`m assuming if you no longer have the filter enabled you should have SLI/Xfire support. In ROF if I use SLI I get a noticable decrease in fps, it`s not supported. |
#5
|
|||
|
|||
![]()
@Speedingbullets I don't think it will be that simple (Removing one line from conf.ini and sli is supported)..
|
#6
|
|||
|
|||
![]() Quote:
i see ![]() After doing this for two days now all i can conclude at this point is that my video cards and processor are both stable and running fairly cool with ROF and 1946 at 1920 x 1080 res full settings on both as well as my cards doing a lot of extra filtering. Both games run flawlessly. IL2 COD at any resolution at any settings really even if i do get improvments in FPS, the shudder is still present and for some reason this game causes my Master Video card to peg at full activity and it runs consideribly hotter. Now these cards run hot any way i know but i have been watching mine for about 3 months now and im pretty sure that the crossfire is not being utilized because of how its acting. It is acting like the Master video card is doing all of the work and the slave is just sitting idle. This leads me to believe that if the Filter and the SLI/Crossfire are linked together somehow then the filter is not deactivated and will not be (based on the latest report) until after the first round of patches. I hope this clarifies what i have found so far. if not then im sorry have only slept about 3 hours in the past 48 ![]() |
#7
|
|||
|
|||
![]()
Could someone check the fragmentation rate of the hdd after install? It is known, that some games leave the disk behind as a battlefield after install.
(Just thinking about Armed Assault 2, which leaves an empty dedicated partition 30% fragmented after install) |
#8
|
|||
|
|||
![]()
~S~
On behalf of 79vraf i would like to thank all 1c company members for all your work involved in that creation, even though it could brake a few marriages or caused some of You to loose weight or even opposite it was all worth it... Hi chaps, just got my copy downloaded from Russians only 14$... now this game is worth every single penny u spent on it so I think I am going to get English ver now as well. I had a bit of headache for a 2 days because of it and peoples screaming on the forums, but now all the problems seems to be sorted out. Major issue was to sort out why the game crashes when tried to change screen actualy projector resolution - solution simple as usual and for long time I didn't even thought that it is 64bit unfriendly ![]() ![]() ![]() Just to be clear I give u my spec: I7 930 clocked to 4Ghz, 3x2 GB RAM at 1333, geforce gtx 470, asus p6t deluxe v2 mobo, 1000W psu, track ir 4, saitek x52+rudder ped, acer 1260p projector |
![]() |
Thread Tools | |
Display Modes | |
|
|