![]() |
|
IL-2 Sturmovik: Cliffs of Dover Latest instalment in the acclaimed IL-2 Sturmovik series from award-winning developer Maddox Games. |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]() Quote:
Here's the low-down for the UK: Buying online from shops or suppliers The purchase of goods and services over the internet, by phone or by mail order generally is subject to the Distance Selling Regulations. One of the most important implications of these regulations is a cooling off period of 7 days during which you have the right to cancel. You must provide notice of cancellation in writing and it must be posted to, left at, faxed or emailed to the business address of the supplier, and you must ensure this is done no later than 7 working days after receipt of goods. Contracts for financial products sold by distance means are subject to different rules, see below for more on this. Something else worth mentioning is that the supplier must have sent you written confirmation of your order no later than the time of delivery of the product or performance of the service. If they did not, then your 7 day cooling off period will not begin until they do, and may be extended by a further 3 months. If you have commissioned a service under a distance selling contract and the work begins before the end of the 7 days cancellation period, then you must give up your right to cancel, but this must be clearly communicated and with your express agreement.
__________________
Another home-built rig: AMD FX 8350, liquid-cooled. Asus Sabretooth 990FX Rev 2.0 , 16 GB Mushkin Redline (DDR3-PC12800), Enermax 1000W PSU, MSI R9-280X 3GB GDDR5 2 X 128GB OCZ Vertex SSD, 1 x64GB Corsair SSD, 1x 500GB WD HDD. CH Franken-Tripehound stick and throttle merged, CH Pro pedals. TrackIR 5 and Pro-clip. Windows 7 64bit Home Premium. Last edited by brando; 03-26-2011 at 11:08 AM. Reason: clarification |
#2
|
|||
|
|||
![]() Quote:
http://forums.steampowered.com/forum....php?t=1117862 |
#3
|
|||
|
|||
![]()
I have successfully overclocked my Processor to run at 3150Mhz by setting Host clock frequency to 150. My processor is running hot enough that I know that I should not raise this any more than that.
I have a question about memory. I can get my memory to run with two different settings and I am not sure which one is better. My memory is 6x2gb DDR3 1600mhz CL9 Setting: AUTO on bios (Details from a program called CPU-Z) DRAM 600mhz FSB : DRAM 2:8 CAS Latency (CL) 9 clocks RAS to CAS Delay (tRCD) 9 clocks RAS Precharge (tRP) 9 clocks Cycle Time (tRAS) 22 clocks OR If I change a fequency setting on my memory settings in bios I can get the following: DRAM 900mhz FSB : DRAM 2:12 CAS Latency (CL) 10 clocks RAS to CAS Delay (tRCD) 13 clocks RAS Precharge (tRP) 13 clocks Cycle Time (tRAS) 31 clocks Now which one of those two Memory options above is better, it seems that the processor is running hotter wen memory dram is set to 900mhz? Last edited by Devastat; 03-26-2011 at 12:35 PM. |
#4
|
|||
|
|||
![]()
I think you set it on MANUAL, and then put in individual timings based on what your ram will tolerate. Check the documentation that came with your ram for the specs. Generally, the lower the timings, the better, and first you adjust timings before voltages. Then you have to test for stability and heat. It's been a while since I overclocked.
|
#5
|
|||
|
|||
![]()
So you mean that 600mhz DRAM is faster than 900mhz DRAM?
|
#6
|
|||
|
|||
![]()
No. Actually I'm thinking when you go to MANUAL mode, you may be able to bump that up to 1600mhz cuz that's what you say your ram is rated at? But I don't know for sure. There may be a multiplier effect going on where you have to divide the rating. I just don't know off hand with your setup. I would have to do some research to figure it out and I'm about to fall asleep (lol).
The "timings" are the other settings (e.g., tas). Get those from the instructions that came with your ram or the company website. |
![]() |
Thread Tools | |
Display Modes | |
|
|