![]() |
#1
|
||||
|
||||
![]()
I was considering buying this stick because my X52 pro is going to take his last breaths.
If someone has the Warthog I'd like to know if throttle is noisy. I had to sell Cougar because my wife didn't tolerate the "clunck" of the throttle. Thx in advance for your answers.
__________________
|
#2
|
|||
|
|||
![]()
only one type of noise you will be hear is metalic clicks when you will be switch toggles on rud
if i right understand point of question) warthog - really good thing |
#3
|
||||
|
||||
![]()
Thx that's good.
The cougar had "clunks" passing from idle to cruise and from cruise to afterburner position....
__________________
|
#4
|
||||
|
||||
![]()
S!
You can remove the Cougar throttle detents (the things that go clunck) ![]() To answer your question: The Warthog throttle is quiet. Well, depends on how violently you use the switches or the Idle detent. But the throttle lever itself moves smooth and quiet. My Cougar stick gave out a month ago after serving for 5 years (the cast aluminum inner workings just gave out). So I bought the Warthog(stick+throttle) ... and after getting it I noticed that it would have been available as stick only for 100€ cheaper ("damn") ![]() But the stick is awesome. It moves so fluidly, and the spring isn't so powerfull so my hand won't get as tired on long flights ![]()
__________________
AMD 1055T Hexacore@3,4GHz - 2x4GB 1600MHz DDR3 - ATI 6950 2GB, flashed to 6970 shaders - Windows 7 Ultimate 64-bit - 30" LG W3000H (2560x1600) - TM Warthog Stick + Cougar Throttle - wooden DIY pedals with Hall sensor - FreeTrack Last edited by Untamo; 06-20-2013 at 05:39 AM. |
#5
|
||||
|
||||
![]()
Finally the Warthog has arrived. Construction is amazing.
I have some issues on setting it up. The stick is centered like a rock in stick analizer, but in game it happens that if I move it slightly off the center left or right, it seems like it is drifting. I find it a lot difficult to avoid plane rolling...on one side or the other. Maybe I need to tweak the curves. Actually I am using the X52 method which is 100% up all sliders.
__________________
|
#6
|
|||
|
|||
![]()
You may need to calibrate it in WINDOWS... The Warthog uses Hal sensors which aren't noisy and should NEVER spike. Make sure you check things out and if you still have a problem you may want to return it since it's so new.
|
#7
|
||||
|
||||
![]()
Thx Stubing,
I hadn't the time to play a lot on last days, but it seems I am having promising results changing the in game sliders, reducing sensitivity around center. From what I've read on forums none uses the warthog with all sliders up on IL2. Will post here as soon as I have done more tests.
__________________
|
![]() |
|
|