Game graphics and Radeon 6970 settings help

[rakinroll]

Originally Posted by Ataros

Turn it on if you set vsync on.

For freezes try putting buildings on minimal settings OR on the contrary set buildings to unlimited but with very low detail.

Check a guide in my sig.

Thank you Ataros, i will check and report tonight.

Regards.

[rakinroll]

No way, still bad graphic details.

[W0ef]

Make sure you have all drivers updated to the latest version.

Check out this thread here and follow most if not all of the suggestions made in it:

http://forums.eagle.ru/showthread.php?t=68060

(last link courtesy of someone else who posted this before)


Only way to get rid of the three blue lines on Radeon cards is running in DX9 mode instead of DX10, but you might suffer from fps dropping (at least it gives worse fps for me)

You have to set this in the conf.ini in Documents\1C SoftClub\il-2 sturmovik cliffs of dover\conf.ini

Of course defrag your system and shut down unneeded background processes, also disabling windows Aero themes might help.

Added example image of how much of an immersion killer those blue lines are below:

[rakinroll]

Thank you W0ef, i will try it.

[W0ef]

Originally Posted by rakinroll

Thank you W0ef, i will try it.

Right now first thing to try if you havent done so yet is installing the latest Beta patch. It changed pretty much everything.

[TonyD]

First time I’ve seen those lines (in the screen shot). From another post, this seems to be something that affects the HD69XX cards. I get a faint line between 200 and 500 feet only, but wouldn’t have noticed it if I hadn’t specifically been looking for it after reading the other post. I have yet to try the latest patch, though.

[Doc_uk]

Those line are not there if you use direct x 9....... Render=D3D9_0
well there not for me, but they are there if i use dx10 mode

[PaulWF]

Originally Posted by TonyD

First time I’ve seen those lines (in the screen shot). From another post, this seems to be something that affects the HD69XX cards. I get a faint line between 200 and 500 feet only, but wouldn’t have noticed it if I hadn’t specifically been looking for it after reading the other post. I have yet to try the latest patch, though.

problem is as you get higher they start to REALLY stand out.

it's a bug that needs fixing.

[Blackdog_kt]

I use an older Ati card (4890 1GB) and i never had these lines, maybe it only happens on the 69xx series cards?