b-25 blind landing lights..

[Tempest123]

I just tried the B-25 blind landing, and the runway light request only turned on the runway end lights (red), which are too dim to be useful. Opening up the mission builder it would seem that there are no runway lights placed at Wards?
Is this a bug?

Quick edit, the request for the runway lights to be put on should be acknowledged and done waaaayyyy earlier, as soon as the pilot requests on the range of that frequency. As it is now they can only be turned on when you are nearly overtop the airfield, which is not much use. I requested the lights about many times, at 3.5miles back, 3 back and 2, and only heard "roger" and saw lights turn on when I was at the threshold.

[dflion]

In the FMB you can quickly setup your runway lights at Wards in any pattern you require by placing 'light type 1' along the runway, changing the light properties to 'Red' for each light and you are ok to go. Light type 1 is bright enough to be seen from a distance.
Request lights to be turned on from Ground control when you are in the landing pattern (you may have to request twice before you get a 'Rodger'). There is a few seconds delay and they come on.

Hope this will help.

DFLion

[blowpipe]

at Wards??

[Seeker]

Is there any way to put lights on a CV?

[Tempest123]

Originally Posted by blowpipe

at Wards??

Is the name of the airfield that the player lands at in the mission

[blowpipe]

Oooh, thank you.

[smokincrater]

The light s need to be turned on at a greater distance and turned off when required.