![]() |
|
#1
|
|||
|
|||
![]()
Hello Daidalos Team, I have a question concerning the maximum range and fuel capacity of the G4M1-11.
I was flying a mission with the G4M1-11 on the Solomon Islands map in 4.11. The start airfield was in the south of Bougainville and the target was at Tulagi. Most of the time I used the autopilot. The speed was 320, the altitude 3500 m and fuel in the tanks was set to 100. On the way back I ran out of fuel before reaching my airfield, although in reality the Betty was able to make this trip without problems. When I flew the same mission with a fully loaded D3A1 it flew to the target and back to the airfield without running out of fuel, although it should have a shorter range than the G4M1. Could you please take a look at the G4M1-11 to see if the historical correct fuel capacity is used in the game? |
#2
|
|||
|
|||
![]()
What power settings were you using to cruise?
|
#3
|
|||
|
|||
![]()
I used the autopilot for 95% of the time, so I don't think it was caused by using the wrong engine settings.
|
#4
|
||||
|
||||
![]()
Fuel leak from flak damage on the way back, maybe. The G4M1 had no self-sealing fuel tanks.
|
#5
|
|||
|
|||
![]() Quote:
I flew the mission again, but this time completely on autopilot and the results were the same. The player plane ran out of fuel first. The AI G4M1 flew some minutes longer and then their engines stopped too and they ditched. I also tested the mission without bombs, but this didn't made a difference. In real life the distance between Bougainville and Tulagi is around 560 km, which shouldn't be a problem for a Betty. I have uploaded the mission for those who like to test it. Because of the long flight time I recommend using the time-skip option. http://www.axis-and-allies-paintwork.../G4M1_Test.zip I hope someone can take a look at the data of the G4M1-11 to see if something is wrong with the fuel capacity. |
#6
|
|||
|
|||
![]()
One of the things fixed in 4.11 was fuel capacity of some planes. Maybe a bug was introduced. I'll try to test the Betty today.
PS - you need to upload the .mis file and .properties file. |
![]() |
Thread Tools | |
Display Modes | |
|
|