Ju-87 rudder not in the center

[_YoYo_]

Maybe it was but I cant find here.

Please vote it: http://www.il2bugtracker.com/issues/235

Screen: http://img836.imageshack.us/img836/8062/rudderbug.jpg

In Ju-87 (CoD v.1.05.15950) the rudder isnt in the center in interior and exterior of model. This is default screen without touching the rudder - but aircraft flies ok forward. Please fix it.

[vnvv_stea]

Hi All,

+1 For BF109! The pedals are centred but not the ruder!

[VO101_Tom]

Originally Posted by _YoYo_

Maybe it was but I cant find here.

Please vote it: http://www.il2bugtracker.com/issues/235

Screen: http://img836.imageshack.us/img836/8062/rudderbug.jpg

In Ju-87 (CoD v.1.05.15950) the rudder isnt in the center in interior and exterior of model. This is default screen without touching the rudder - but aircraft flies ok forward. Please fix it.

Hi. If you look the trimm knob (left panel, big grey knob), you see, the rudder trim isn't center by default.
Set to center, and the rudder will be ok...

[_YoYo_]

Thx Tom, I will check, but why if You take Ju-87 from the beginning trim isnt in the center position?

[41Sqn_Banks]

Because aircraft are trimmed for level flight by default.

[_YoYo_]

Originally Posted by 41Sqn_Banks

Because aircraft are trimmed for level flight by default.

How is possible? If I take aircraft on the grond I must take him with trimms for ZERO. Just for operations like take off, climbing, windy weather ect can setup trimms as we want - in the real. For me if You take virtual model must be too same, so you take aircraft with "nul" positions of all trimms.

[VO101_Tom]

Originally Posted by _YoYo_

How is possible? If I take aircraft on the grond I must take him with trimms for ZERO. Just for operations like take off, climbing, windy weather ect can setup trimms as we want - in the real. For me if You take virtual model must be too same, so you take aircraft with "nul" positions of all trimms.

It should be centered, or not, whatewer. It isn't a bug. Set to center before take off, and your problem solved

[_YoYo_]

Originally Posted by VO101_Tom

It should be centered, or not, whatewer. It isn't a bug. Set to center before take off, and your problem solved

Yep - it can be the wish or the feature .

[Artist]

Hi Yoyo,

Originally Posted by _YoYo_

Yep - it can be the wish or the feature .

So what about the issue 235 in the bugtracker? Do you want me to change it to Bug: "Ju 87: Rudder trim not centered at startup"

Artist

[_YoYo_]

Originally Posted by Artist

Hi Yoyo,



So what about the issue 235 in the bugtracker? Do you want me to change it to Bug: "Ju 87: Rudder trim not centered at startup"

Artist

Yes it can be!

But second question - I dont create the new subject - I noticed in Ju-87 than prop pitch lever works in oposit side than in other German aircraft. I don talk about situation when You use mouse for sure, but when prop You have set up on your controller (full engine management). Example : in Emil E-3 take lever of controler for increasing prop, lever in virtual cocpit did too same - forward so its ok. In Stuka, if You do too same lever in VC goes to backward (!) when you take your controller forward. For me its a bug but can any check this? Remeber - manual management.