Steps for landing with controller
I'm going to avoid things like come in straight with about 20% throttle yadda yadda yadda. I hope you guys know all of that (not trying to sound snobbish).
1. Make sure your flaps are set to landing (X button on 360)
----They will only set that way when your landing gear is fully lowered.
2. When touching down pull all the way back on the throttle stick (Right Stick) and all the way back with the Left Stick so your nose is pointing as high as possible with the wheels touching.
---Pulling back on the throttle acts as a wheel break.
At around 50 KM/h your plane will try and flip. The best way to avoid this is by making sure you are level and rolling straight and having both sticks pulled back. Make sure to remember that speed when trying to turn the aircraft around as it will still try and flip.
For turning the aircraft around on the ground use nothing but rudder (Right Stick) and have a constant battle with throttle percentage. You don't want to go above 30% but you don't want to stay at 30% for very long as you will start to pick up a lot more speed the necessary and will probably lose control. I tend to bring it up to 30%, start to move and turn, then quickly bring it back down and even apply break if necessary.
If you have any more questions about this or additions, just say.
|