Hi Smeghead,
I will try to help you get it running if I can. Are you using the on screen information display that comes with EVGA Precision? if not download the tool from EVGA (it's free) and install it.
Make sure it runs with C.o.D. (it includes Riva Tuner )
If you select the correct loadings you will be able to see what is happening with your cards.
I would expect to see the card temps within a couple of degrees of each other (probably lower than just one card was reading) and the usage percentage demand varying between the two cards. The ram usage should be about the same for both cards.
I have not overclock my cards,( run at stock settings) and limit fps to 36 (this can all be done with EVGA Precision Controller. MSI has a similar tool).
Does the Cliffs of Dover profile show in your Nvidia Inspector? it should if you have installed the code correctly.
Have both your cards got the same amount of V/ram?? they must both be the same V/ram for Sli to work
__________________
Rick
Asus M4N98TD-EVO
AMD Phenom2 965 x 4 3.4gig
8gig DDR3 Ram
2x GTS 450 Sli (1gig each)
1Tb HDD Partitioned x 5
700w Coolermaster single rail P/S 52a
Windows 7 64bit
19" Samsung 931BW monitor
1280 x 960 Resolution
Last edited by RickRuski; 06-25-2013 at 02:57 AM.
|