[ATAG_Septic]

Hi Rick,

I found your question whilst looking for the profile as I needed to reinstall it.

I'm getting good results, cards run at ~23 - 55% usage and temps up to 63c, no stuttering, everything max. This compares with one GPU running at up to 99% and temps in the low 80s (bit high for my taste).

Forcing AFR1 or 2 in the NVIDIA control panel both work to some degree also but I prefer the results from method.

Cheers,

Septic.

P.S For anyone else searching here's Rick's helpful instructions posted elsewhere here but hard for me to find;

If you have Nvidia Inspector here's what to do: -

Open inspector, select _GLOBAL_DRIVER_PROFILE

Then come along on the same line to where you see 2 green arrows (one pointing up, one pointing down) left click on the one that gives you export driver profiles (should be the left one). There you will have 3 choices, select "Export all profiles"(Nvidia text format). This will bring up a new window asking what the file name is? copy and paste _GLOBAL_DRIVER_PROFILE into the file name request box, you will have to direct the save to your new folder. See below: -

You will need to make a new folder to export the files to (I have made mine in "Documents/Sli profiles")

Once you have the files exported you will be able to open them in txt format in your new folder, all the games that are listed under the global settings are in there in alphabetical order.
Scroll down to just past Il2 Sturmovik Forgotten Battles etc, then copy and paste this entry below that point.


Profile "Il2: Cliffs of Dover"
ShowOn GeForce
ProfileType Application
Executable "il-2 sturmovik cliffs of dover/launcher.exe"
Setting ID_0x00a06946 = 0x000240f5
Setting ID_0x1033cec1 = 0x00000001
Setting ID_0x1033cec2 = 0x00000002
Setting ID_0x1033dcd1 = 0x00000004 UserSpecified=true
Setting ID_0x1033dcd2 = 0x00000004
Setting ID_0x1033dcd3 = 0x00000004
Setting ID_0x1074c972 = 0x00000001 UserSpecified=true
Setting ID_0x1095def8 = 0x00000004
Setting ID_0x1095def8 = 0x00000000 UserSpecified=true
Setting ID_0x10f9dc81 = 0x00000010 UserSpecified=true
EndProfile

You will then have to save the change as normal then re-import the new profile back into Nvidia Inspector as per instructions. (The other green arrow is the import in Inspector)
You should now find a new profile in "Inspector" "Il2: Cliffs of Dover".

If you have done it correctly you should get a message saying the profile has been imported successfully.