View Single Post
  #10  
Old 08-07-2012, 08:29 PM
ATAG_Dutch ATAG_Dutch is offline
Approved Member
 
Join Date: Feb 2010
Posts: 1,793
Default

Quote:
Originally Posted by jf1981 View Post
It should be stated that apparently, the controls were too heavy at such high speed, one could get out of the dive through use of the trim tab.
Quote:
Originally Posted by ATAG_Snapper View Post
Dutch gave me the heads up that the Spits can now go in excess of 420 IAS without falling apart, which I'll have to try out.
Both true. In fact when I did my dive tests, I pulled out using the trimmer exclusively. In the high speed dives, I need a lot of down trim and a lot of rudder trim, but got up to at least 440mph, maybe 450, but by that time I was more concerned with where the ground was.

P.S. I also brought prop pitch down to fully coarse, i.e. lowest revs.

Last edited by ATAG_Dutch; 08-07-2012 at 08:34 PM.