View Single Post
  #11  
Old 08-07-2012, 02:52 PM
klem's Avatar
klem klem is offline
Approved Member
 
Join Date: Nov 2007
Posts: 1,653
Default

Quote:
Originally Posted by Krt_Bong View Post
Well< I did a reinstall, hmm still have the same problem - take any (single engine) plane get it flying as trimmed out as in game controls allow, let go of stick - Rolls right - Adjust to level flight with stick then let go and slowly add left rudder till full travel, still rolls right. Now here is the kicker, slowly add right rudder to full travel - it rolls left !?? No other flight sim does this and I have a bunch, cant be the stick every test I have says it centers fine, someone else has to have this problem or maybe they assume it's torque?

I should add that this doesn't seem to be a problem in the Moth or the right rudder left roll in the Hurri but it is well pronounced in the Spit , G-50 and 109 please check this out it's making me crazy.
If you are having to hold the stick to get trimmed out you are not trimmed out. You may still be fighting the torque with the stick.

Adding left rudder and still getting right roll may mean the torque causing the roll is overcoming the dihedral effect on left rudder.

Can't explain the right rudder left roll though

Have you tried reducing power and rpm to see if will trim? The Hurricane MkI needs (needed, I haven't rechecked it) about 2200rpm and boost about +1. Something like that anyway.
__________________
klem
56 Squadron RAF "Firebirds"
http://firebirds.2ndtaf.org.uk/



ASUS Sabertooth X58 /i7 950 @ 4GHz / 6Gb DDR3 1600 CAS8 / EVGA GTX570 GPU 1.28Gb superclocked / Crucial 128Gb SSD SATA III 6Gb/s, 355Mb-215Mb Read-Write / 850W PSU
Windows 7 64 bit Home Premium / Samsung 22" 226BW @ 1680 x 1050 / TrackIR4 with TrackIR5 software / Saitek X52 Pro & Rudders