Okay i just tested this in a 190. I flew straight and trimmed for level flight, the ball was centered and yet the right wing drops slowly. Have to hold the stick slightly to the left to keep flying straight. This is really weird, i was perfectly trimmed and it still dropped!
Quote:
Originally Posted by misjka
Hi!
Isn't there somewhere a guide for how to set up the X52 so most planes fly straight with that stick? I've noticed that all (well, at least the ones I've tested, about 20 or so) planes but most the russian and the japanese do not fly straight. I.e. the aileron always needs to be trimmed - quite a lot - since the planes just dip their right wing... That sounds pretty weird to me, but that's my experience. And many planes just react very slightly upon trimming, if at all...
As I use my Saitek Av8r stick instead with e.g. Gladiator or Corsair, the planes go straight ahead without a fuzz...
|
Quote:
Originally Posted by Urufu_Shinjiro
When I was using the twist for rudder I had a gentle curve on the input and also added some filtering to prevent the wobble when the twist snapped back to center. Worked a treat.
|
I put linear pattern 50-100 and 10 filtering. Made it easier to keep the ball centered during flight!