Quote:
Originally Posted by Blackdog_kt
This would also have a welcome effect in aircraft with a tail-wheel, the more you brake the more pressure you are also putting on the elevators so that you don't nose over.
|
When you use a key (or joy button) as axis modifier - the previous function of axis stop to work, so no pressure is applied in elevators.
If you landing with stick back - elevator up - and the hit the key/button for axis modifier, the brake (axis) start for actual stick position (back) and hit brakes with 50/70/100% that result in nose over.
To apply brake from 0% you need to start brake with centered stick. (1)
Sample of configure for 109:
You can have brake for both wheels, and for right or left individually.
(1) After assign key/button + axis for brake you need play whit "Out" slider until zeroed
the green dots, or since stick (elevator) is always in 50% of axis (due springs), when hit axis modifier key/button you start whit 50% of brake = nose over.
Another point: if you release the key/button modifier before center axis - the brake force still the currently applied (ie. 70/90%...). So center stick before release key.
Well, this work but is a bit confuse.
Sokol1