Quote:
Originally Posted by SEE
Your convergence, once set, is saved for each ac in the user.ini file and loaded everytime you fly that particular ac (in SP).
Adjusting your gunsight will not affect these settings or the size of the ring which is fixed at 105mm. Not quite sure why you think your perception of the convergence point should change. Convergence is set by the ground crew and remains fixed, adjusting the cross hairs provides a means of calibrating them with respect to the gunsight ring to suit your convergence settings for a particular wingspan. The crosshairs calibration for the Spit isn't accurate at the moment.
|
Thanks for the detailed reply
I wasn't sure if convergence was fixed or if there was some sort of electromechanical system fitted to enable changing it in flight.
Just to clarify; Are you saying the following?
- the convergence should be set up as desired in the loadout screen for each gun
- then set the distance ring to 2 x the convergence specified in the loadout (2x because of the bug)
- then set the wingspan to that of the target (32ft for bf109, 54 ft for bf110 etc)
- When the wingtips of the target are touching the innermost part of the horizontal gunsights - fire!
Sorry for dragging this up again, I'm just really confused over the issue.