View Single Post
  #7  
Old 06-11-2011, 09:11 AM
robtek's Avatar
robtek robtek is offline
Approved Member
 
Join Date: Oct 2007
Posts: 1,819
Default

Freycinet,
for more immersion a few things that could be better, imho.
First thing, when starting the 109 you use the "Handpumpe" -> This pump is only for emergency extraction of the landing-gear, the manual fuel injection isn`t modeled.
Second thing, for warm up you only open the water cooler to about 50 %, the oil cooler stays closed until 40°C are reached, then open to about 40%.
Third thing, after take off reduce the ata to about 1,2 to preserve the engine, adjust rpm to 2450 for climbing.
fourth thing, when reaching the wanted altitude go to 2250 rpm for fast cruise.
fifth thing, when seeing contacts go immediately to 2450 rpm and 1,32 ata, don't wait for the enemy to be close and you are not ready.
The movie as it is is just fine, that would be only small improvements as i see it.
cheers
__________________
Win 7/64 Ult.; Phenom II X6 1100T; ASUS Crosshair IV; 16 GB DDR3/1600 Corsair; ASUS EAH6950/2GB; Logitech G940 & the usual suspects
Reply With Quote