View Single Post
  #8  
Old 05-31-2011, 02:35 PM
FS~Phat FS~Phat is offline
Approved Member
 
Join Date: Dec 2010
Posts: 609
Default

All Assembled







Overview page of my config in Aquasuite 2012.
A couple of the fans generate a dirty RPM signal below 6v but it doesnt effect the operation as the fans are voltage controlled anyway.



Settings screens







Aquaero screenshots













I did some reconfiguring today.
Ive loaded the 4 D5 pumps onto the controllers and they work a treat!
I have the following config now:

A5
Ch1 PA2 Fans
Ch2 D5-1 GPU Loop
Ch3 Exhaust Fans
Ch4 D5-2 GPU Loop

PA2's
Ch5 CPU Rad1 Fans
Ch6 CPU Rad2 Fans
Ch7 GPU Rad1 Fans
Ch8 GPU Rad2 Fans
Ch9 D5-1 CPU Loop
Ch10 D5-2 CPU Loop

Flowmeter 1 CPU Loop
Flowmeter 8 GPU Loop

Temp Sensors
T15 Ambient Air Temp
T13 Rad Air In Temp
T7 Internal Air Temp
T14 Rad Air Out Temp

T1 CPU Water in
T2 CPU Water out
T3 CPU Water Res out
T4 GPU Water in
T5 GPU Water out
T6 GPU Water Res out
T8 CPU Temp
T16 GPU Temp

Here's a 15min Furmark run with 15min cooldown.
What an amazing piece of technology!
Reallllly quiet for normal computing and light gaming, but an absolute powerhouse when required. All seamlessly controlled.






Last edited by FS~Phat; 05-31-2011 at 02:37 PM.
Reply With Quote