Quote:
Originally Posted by kingpinda
I have/had no problem starting the hurricane with mix rich ie. full backwards. If this is correct I don't know. but it starts.
The spitfire mystified me however seemingly mix rich seems to be full forward. If this is correct I don't know either. but full backwards in spitfire seems to be lean.
|
Well I'll admit to some confusion but if you Alt+Right Click on the screen and open an info Window, Alt+Left Click on the blue header to select the window then Alt+Right click in that window and move Engine Info across to the middle pane you can see that the Hurricane lever in the rear 'Rich' position is giving 0% Rich and in the forward 'Lean' position is giving 100% Rich. You get the same results whether you are using an Axis or Keys for your mixture control.
On the Rotol prop FT-N, when you close the throttle it pushes the mixture lever to the rearward opsition, i.e. Lean not Rich (remember its backwards) which is not what you want when starting theengine, you want Rich, and that's the one I have to move the throttle forward on so that I can move the mixture lever out of fully Lean to start the engine. Curiously the info window shows the mixture doesn't change until I give my axis a slight tweak when it goes to 0%.