from my point of view with the new beta firmware the stick is very precise.
All axis of the stick except x/y still have the reversal glitch. Precise when moving in one direction, if direction is reversed, there is a gap of around 3%.
e.g.
Moving up from 30 to 31% is precise, moving down from 31% firstly nothing happens then a jump to 28% is made.
This i a major glitch when trying to control 2 motors independendly or if trying to find correct trim settings of rudder etc.
Up to now to solutions to solve it:
Use of MikkOwl Multithrottel Tool
Modding the G940 with e.g. Bu368 Joystick Chipset.
|