View Single Post
  #11  
Old 01-25-2011, 04:43 AM
WTE_Galway WTE_Galway is offline
Approved Member
 
Join Date: Jul 2008
Posts: 1,207
Default

Quote:
Originally Posted by Ernst View Post
As far as i known Mrs Shilling Orifice was a not a definitive solution. The time for engine recovery was just lesser, but the negative g effect still there. Even carburetor was not as good as fuel injection.

All the Tilly Orifice did was restrict the maximum rate of fuel flow to the float chamber and hence reduce the rate of flooding and resultant over rich mixture cut-out in the SU carbs fitted to early Merlins. (The needle valve was also modified.)

It absolutely did NOT eliminate the problem just made it more manageable.

Eliminating the problem completely was impossible without using a totally different type of carb or going to fuel injection ... the neg G issue was "built in" to the float chamber based SU carb design.

The onset of neg G flooding and cut out was much later in a Tilly/Shilling Orifice equipped Merlin than with a standard SU but the problem remained and sustained inverted flight was still impossible.

From 42/43 onwards Bendix and later Rolls Royce pressure carburettors were fitted and these actually DID eliminate the problem altogether.

Last edited by WTE_Galway; 01-25-2011 at 04:46 AM.
Reply With Quote