Quote:
Originally Posted by _RAAF_Stupot
No - Red just can no longer select an La. (If the La was the only plane available, the mission would be effectively over, because Red would have no flyable aircraft!)
Not quite - they will be able to select any remaining P40's plus the other two types of aircraft available at the base.
My question is more to do with how the planelimit is implemented. I'm sorry Alpha, but you didn't really answer my question..... 
I'll try asking it another way:
If I have: SpitfireMkV=10
Can 20 pilots actually select a Spitfire at the beginning of the match, and then if half of them are shot down, the Spitfire is no longer available for respawning pilots?
OR
Can only up to 10 pilots select a Spitfire at the beginning of the match? |
Quote:
Originally Posted by KG26_Alpha
Setting the aircraft limit is just that 10 planes only when they are destroyed mission is over.
I hope this helps you.
[PlanesArmy1]
La-5FN=10
[PlanesArmy2]
Bf-109E-4=100
Description:
[PlanesArmy1]-red army
[PlanesArmy2]-blue army
La-5FN=10-its only 10 La-5FN allowed for red team,other planes have no limits in use. (so you can add any other planes like in this example)
By using <planes command you can check ppanes which have limitations set on them, if theres any settings about it in *.ini file of map file.
(to work with limitations you must mark a checkbox in the IL2SC settings)
You also can set restrictions on for any armament of airplanes
Format:
[PlanesArmy2]
Bf-109G-6=100,U3-MK108;R5-MK108;U3R6-MG151-20
spaced from planes number by «,» symbol, spaced from each other by «;» symbol
in this example you can see, that for plane limit of 100 planes type Bf-109G6, you can not carry on these planes
U3-MK108;R5-MK108;U3R6-MG151-20 gun installations
available armament list you can check in yours eventlog file
"Planes Count" parameter is not necessary one, but it can be set like this:
[PlanesArmy2]
Bf-109G-6=U3-MK108;R5-MK108;U3R6-MG151-20
|
OK
You have 20 planes that's 20 available to fly till they start getting shot down, and 10 pilots, so one pilot might trash 10 planes so long as he survives before killing all available pilots which is 10.
Or the 20 Aircraft are all lost.
You need usually more planes than pilots or the same amount.
Using IL2SC interface you can set Aircraft 20 Pilots 10 something like this which cover the teams not individual ac.
Or
In the .ini file something like this which also covers the teams not individual ac.
Then set individual ac limits in the [PlanesArmy1/2]
