View Single Post
  #3  
Old 02-26-2010, 10:16 AM
julian265 julian265 is offline
Approved Member
 
Join Date: Aug 2009
Posts: 195
Default

I set the roll and pitch axes of my stick to 50% dead band (in IL2), no filtering, and all 100% sensitivity sliders. I saw the green square move in the input setup section, for both roll and pitch, when the real stick was crossing the centre.

I then watched a Beaufighter's and P-51's stick when on the ground, and could not see any movement at all in the column/stick, when doing the same movements as above.

I use a 4096 step BU0836A and hall effect sensors. Due to it's long throw, I normally use 100% sensitivity and no filtering, and have noticed (when keeping the wings level) that IL2 has a noticeable step around joystick-centre, when at any other position, it a tiny joystick movement yields a tiny in-game joystick movement. I've always thought something was a little wrong... along with the strange interpretation of power/pitch axes (I know from DIView that the stick is giving 4096 steps for these axes as well, yet IL2 gives me 2-3% increments).
Reply With Quote