What sensitivity did you all settle with (AV8R)
 

I have the av8r and still trying to find what sens. to use. It seems some planes are more sensitive than others.. I have mine at about 6 clicks down from full....Does it really affect how tight you can turn?

I also use the AV8R and I didn't reduce the sensitivity so far. On some planes and in certain situations I can pull the stick to its full extent without stalling. Changing the sensitivity depends on your personal preference I think...

the one i use so i can only stall if i REALLY rattle it around is:

Set BOTH to full, and then reduce each by 11 clicks.

Kind of depends. On the P-51D I set it pretty low. Most other planes I've got it about 7 clicks down. Some it doesn't have to be cut so much. Hope to let up on that more and more as I improve.

Had it on half when playing demo. Now I have it on full. Just takes a while getting used to. Spins a bit more often, but i feel like the deadzone is less pronounced.

I settled with 70% for all but the P-51s. They get 50%.