Official Fulqrum Publishing forum

Official Fulqrum Publishing forum (http://forum.fulqrumpublishing.com/index.php)
-   IL-2 Sturmovik: Cliffs of Dover (http://forum.fulqrumpublishing.com/forumdisplay.php?f=189)
-   -   Logitech G940 Force FB (http://forum.fulqrumpublishing.com/showthread.php?t=27083)

Whiski 10-14-2011 06:48 PM

Logitech G940 Force FB
 
Is anyone having issues with the force feedback with this stick in CLoD? Has anyone found a way to get the FFB to work with CLoD?

I read some of the threads regarding this stick and not sure if anyone has actually got the FFB to work yet.

Whiskey

Kankkis 10-14-2011 06:50 PM

Works for me ok, i must admit, shaking effect is way too strong, my table moves when my 109 is shaking.

ATAG_Dutch 10-14-2011 07:09 PM

Mine works fine, but there can be quite a long delay from the start of a mission to the FFB 'kicking in'.

For instance in the Quick 'Free Flight Dover' Mission it can take up to 30 seconds to start working.

In a mission involving take-off, it often only kicks in as I leave the ground, and this is after full warm-up procedures with CEM.

However it's nowhere near as bad as the problem I have with FSX, where FFB has stopped working properly altogether.:(

Dafunkn 10-14-2011 07:12 PM

Hey all,

I use a G940 as well.

You might need to check that Force Feedback is enabled.

Look in (depending on your setup):


C:\Users\Computer\Documents\1C SoftClub\il-2 sturmovik cliffs of dover\conf.ini


What you are looking for is:
[rts_joystick]
FF=1

The "1" initializes this function.


================================================== ================================================== ================================================== =========


Oh, Kankkis,

Not sure if you are running Win 7, but you can control the amount of Rumble by trying the following (THIS IS FOR WIN 7):

Go to: "Start"

Right side of popup window:

Go to: "Devices and Printers"

There you will see your G940's three components.

Right click on: "Logitech G960 Joystick (HID)"

Select: "Game Controller Settings"


Make sure the G940 Joystick is highlighted, then;

Select: "Proprieties"

The Select: "Settings"

It is there that you can control the amount of rumble and other various settings.

I hope this helps


Peace Out

Kankkis 10-14-2011 07:20 PM

Quote:

Originally Posted by Dutch_851 (Post 349265)
Mine works fine, but there can be quite a long delay from the start of a mission to the FFB 'kicking in'.

For instance in the Quick 'Free Flight Dover' Mission it can take up to 30 seconds to start working.

In a mission involving take-off, it often only kicks in as I leave the ground, and this is after full warm-up procedures with CEM.

However it's nowhere near as bad as the problem I have with FSX, where FFB has stopped working properly altogether.:(

Yes, i got this problem too, forgot to mention. My g940 is working with fsx.

Kankkis 10-14-2011 07:22 PM

Dafung, thanks but i know that, but if i lower ff settings, aal other ff effects goes too small, so effects are not balanced right. I know i can modify it with external program, but too lazy for that, it's wrong balanced effect in game.

Sven 10-14-2011 07:22 PM

Working here with zero issues ;)

Qpassa 10-14-2011 07:32 PM

Quote:

Originally Posted by Sven (Post 349272)
Working here with zero issues ;)

+1

robtek 10-14-2011 09:49 PM

+1

mazex 10-15-2011 09:56 PM

Quote:

Originally Posted by Dutch_851 (Post 349265)
Mine works fine, but there can be quite a long delay from the start of a mission to the FFB 'kicking in'.

For instance in the Quick 'Free Flight Dover' Mission it can take up to 30 seconds to start working.

In a mission involving take-off, it often only kicks in as I leave the ground, and this is after full warm-up procedures with CEM.
(

+ 1 works fine after a while...

/mazex


All times are GMT. The time now is 07:46 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.