Hurricane engine startup Problem
 

.... does anyone know how to get the Hurricane in the first mission of the campagne startet?

I am flying with complexe engine management and in other selfmade missions I have no problem getting the Hurricane off the ground.

In the first mission of the campagne I dont even get the engine started.
I open the fuelswitch, open the radiator, set mixture to rich, switch on the two magnetos, put proppitch on full and throttle on about 20% and push ignition - nothing, only a slight movement of the prop and some clouds from the exhaust pipes thats it, what is different on that Hurricane compared to the one I normally get started?

Anyone know?
:confused:

put less than 20% of throttle... for me i start with only 10%

after looking for difference the only i found between the MKI DH and the rotol MKI.

is the proppitch. it is fix on DH and two position in rotol.

....hmmm, thanks for your answers, ....

see here
http://forum.1cpublishing.eu/showthread.php?t=21641

here
http://forum.1cpublishing.eu/showthread.php?t=20321

here
http://forum.1cpublishing.eu/showthread.php?t=21440

and maybe several others out there that the search function spits out. sigh.

i just try to start the hurri... did you pump fuel before starting engines?

the little hand pump right side of your seat.

I don't think the handpump is for engine management, but rather an emergency pump for the landing gear/ flaps.

I start the hurri without it anyway....

Just make sure: Full rich mix, 10% throttle, press start and WAIT a minute or so for the engine to get running fine, otherwise it will choke and die when you pump up the throttle.

Good luck once you get up though ;)

...thanks redroach for your links.
:)

pump fuel? No I didnt, thanks for the hint will try tonight.
Thanks.

Probably redundant but did you switch the fuelcock to on? That kept me grounded te first mission.