Official Fulqrum Publishing forum

Official Fulqrum Publishing forum (http://forum.fulqrumpublishing.com/index.php)
-   Technical threads (http://forum.fulqrumpublishing.com/forumdisplay.php?f=191)
-   -   CoD & Triple Head (http://forum.fulqrumpublishing.com/showthread.php?t=19901)

tf_neuro 03-31-2011 12:43 PM

CoD & Triple Head [solved]
 
I posted on a different forum (still here at 1c) then I got pointed to this one. I wouldnt post the same thing again so here's the link to the post that I 'should' have posted here
http://forum.1cpublishing.eu/showthread.php?t=19854

maclean525 03-31-2011 01:53 PM

I really hope you can figure out how to make this work because my rig is Eyefinity at 5760x1080. If it doesn't work I simply can't buy it :(

Psycho_Ch!cken 03-31-2011 05:11 PM

I don't know the answer, but I'm curious to find out. That said, performance is absolutely shocking on just 1920 x 1200, so 5760 x 1200 is right out for me at the moment. I'd be happier if they focus on making the thing run acceptably first, then get proper ultra wide support working after that. After all, there's no point having a super wide fov if the framerate is at a mighty 15 is there? :)

Reprobator 03-31-2011 05:24 PM

Default key is mousekey5 + movement up for zooming and down to icrease fov.
It's really nice , bing it as an axe is really a good idea they had.
Now the game doesn't bother to give me the ability to raise down my resolution.
Is there a way to force it in the conf.ini?

tf_neuro 03-31-2011 10:29 PM

I set my resolution manually in conf.ini, the one in My Documents.
You have to disable the cloud in Steam or it will always replace conf.ini with auto-backed-up one.
(Steam tray icon => rightckick =>settings=>Downloads+cloud=>Uncheck the second checkbox from bottom)

CoD kinda works in a window at 2600x996, giving me 90 degrees FoV in the middle monitor + half of the 2 side monitors.

I tried the zoom thing but it doesnt work. First of all, I didnt understand how to hold down the Mouse5 button. On a regular 3 buttons mouse wheel up and wheel down are buttons, OK... but how to hold it? So I changed the assignment to Crtl+Mouse1 but when I hold down Ctrl and Mouse1 (Left, I assume?), move the mouse and nothing happens.

PS: I noticed that CoD works more smoothly in a window than it does on full screen... but it may be me. Or the Triple Head.

Eckhart 04-01-2011 12:24 AM

Found out how to make zoom work with my setting...:)

1 - go to option and assign another key to "mouse5" (have no clue what mouse5 means): just click twice on it and bind a key from one of your joysticks
2 - take off in your preferred plane and then:
* hold down your special key (see above)
* move your mouse back and forth (no need to hold the middle button or move the wheel).....and VOILA

you will be able to zoom in and out...


Now if somebody can make the throttle work for more than a minute...I would be happy:confused:

kingpinda 04-01-2011 02:13 AM

Quote:

Originally Posted by Eckhart (Post 247488)
Found out how to make zoom work with my setting...:)

1 - go to option and assign another key to "mouse5" (have no clue what mouse5 means): just click twice on it and bind a key from one of your joysticks
2 - take off in your preferred plane and then:
* hold down your special key (see above)
* move your mouse back and forth (no need to hold the middle button or move the wheel).....and VOILA

you will be able to zoom in and out...


Now if somebody can make the throttle work for more than a minute...I would be happy:confused:

I'm for now just using the 3 fov's for now as zoom. its a shame they didnt include 2 buttons. 1 for zoom in and 1 for zoom out and/or an axis for zoom...

I can remember with il2 1946 i made with my old saitek a profile with all 10 fov's on a dial... how hard is it to bind zoom function to an axis???

tf_neuro 04-01-2011 03:27 AM

OK FoV adjustment was the key. I kept insisting on 'zoom'.
Thx Eckhart

Kingpinda: sticking with the 3 basic FoV's is not an option for users on 3-monitor setups.

Next: performance. I cant believe I have to run on low settings on a PC that can run RoF at high settings... but that's the stuff for a different whi... I mean, thread.
(but OK, there's lots of stuff I can try before I start whining)

kingpinda 04-01-2011 11:07 AM

Are you using 1 or 2 graphics cards for your 3 monitor setup? if you are able to just use 1, performance may rise. I read alot about this on the eagle dynamics forums regarding eyefinity and/or touschreen helios setups. presumably the extra graphics card results in more bandwith which effects the overall performance negatively. This would however be because optimization is not optimal.

llama_thumper 09-09-2011 03:55 PM

hi guys, any update on this? looking to get a triple monitor display set up, most probably with triplehead2go, hence interested whether this is working properly (a la il-2 style) now?


All times are GMT. The time now is 07:07 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.