Official Fulqrum Publishing forum - OT: For the scale modelers out there ...

Official Fulqrum Publishing forum (http://forum.fulqrumpublishing.com/index.php)

- IL-2 Sturmovik: Cliffs of Dover (http://forum.fulqrumpublishing.com/forumdisplay.php?f=189)

- - OT: For the scale modelers out there ... (http://forum.fulqrumpublishing.com/showthread.php?t=23409)

Codex

05-29-2011 10:49 PM

OT: For the scale modelers out there ...

It's finally here!!! ... this one has been LOOOOONG overdue :)

http://www.hlj.com/product/TAM60322

ATAG_Dutch

05-30-2011 12:03 AM

Quote:

Originally Posted by Codex (Post 290702)

It's finally here!!! ... this one has been LOOOOONG overdue :)

http://www.hlj.com/product/TAM60322

That's not a bad price from Tamiya either.

I still have a 1/48th scale Tamiya Swordfish on the shelf that was close to that price when released ten years ago.

Not that I've done any modelling for a while, too busy flight simming!

I might do a bit now though, while we're waiting for various bits of CoD to be fixed!;)

IvanK

05-30-2011 12:13 AM

Should be good to see if the perennial debate on the nose profile gets up with this one :)

a lot of rivet marks in the first 1/3rd of the wing leading edge !

ATAG_Dutch

05-30-2011 12:23 AM

Interesting to note the welcome return of the 'in flight' stand!

One of the things that annoys me about UK aircraft modelling is that they're all modelled on the ground.

If you tried to enter a competition with a model on a stand, you'd get laughed at.

One of those stupid unwritten rules.

Bloody IPMS! :)

Codex

05-30-2011 12:26 AM

Just ordered it, now I'm going to have to hunt through Amazon. Can anyone recommend a good book for photo references? This is my first P-51 ;)

ATAG_Dutch

05-30-2011 12:29 AM

Quote:

Originally Posted by Codex (Post 290733)

Just ordered it, now I'm going to have to hunt through Amazon. Can anyone recommend a good book for photo references? This is my first P-51 ;)

MysticPuma is a good P-51 source. If you PM him, I'm sure he'll point you in the right direction.:)

Codex

05-30-2011 01:24 AM

Quote:

Originally Posted by Dutch_851 (Post 290730)

Yeah I was a member of IPMS for a while. Every Tuesday night would turn up to the meetings and we'd discuss everything under the sun about what’s happening in the modelling world except on how to build great looking models.

Don't get me wrong they’re a great bunch of guys and wealth of info, but the meetings were too much about the decline of the brick's and mortar retailers, competition rules and how much someone had spent on after market detail kits. Very little was actually about building techniques and ideas.

To me it is an elitist club.

Langnasen

05-30-2011 05:09 PM

Bloody hell, that was fast. There was a very big gap between the Zero and the Spit. I did the Zero, the Spit is in progress (stalled actually). Think I'll give the Mustang a miss, but a 109 or 190 will be snapped up so fast they'll smoke.

DB605

05-30-2011 05:50 PM

Quote:

Originally Posted by Langnasen (Post 291052)

Think I'll give the Mustang a miss, but a 109 or 190 will be snapped up so fast they'll smoke.

+1, although one P-51 would look good along with the many 109's on the table...

whatnot

05-30-2011 06:42 PM

My lack of patience and steady hands don't make me much of a model builder, but I sure would like scale ww2 planes to toy around with. Do you know if there's any manufacturer that sells high detail planes as they do cars for example with a metal finish etc.

My son once got a plastic P-38 with three propellers which made me want to sue the toy company. :)

Codex

05-30-2011 11:23 PM

Well Hobby Link Japan have just announced a Luftwaffe Sale, heaps of Luftwaffe kits going cheap.

I can't help myself :P just bought:

1/48 Dornier Do335A w/Kettenkraftrad
Luftwaffe Interceptor Set
1/48 Heinkel He219 A-7 Uhu

$10,000 yen ~ $115 AUS delivered

Still trying to hunt down a 1/48 Me-140

Khamsin

05-31-2011 08:13 AM

Quote:

Originally Posted by Codex (Post 291207)

Still trying to hunt down a 1/48 Me-140

Dont you mean the Me-410?

Romanator21

05-31-2011 10:38 PM

Quote:

I don't know exactly what you're looking for in terms of detail or accuracy (a p-38 without 3 engines? ;) ), but you can certainly purchase pre-built or nearly pre-built models.

I got 2 of these as a gift:

http://www.flyingmule.com/products/IX-DDIJ023

21st century toys make cool displays too. I got a 1/18th FW-190 D-9 from a friend, but they have quite varied subjects. All you have to do is attach the wings:

http://www.cybermodeler.com/hobby/pr..._21c_tbf.shtml

But you should seriously try your hand at modeling. :-) Even if the result isn't "award-winning" it is fun to do. 1/72 is my favorite scale because I can display many on a shelf, and I don't have to worry too much about detail (In fact, I find panel lines are too large for the scale, so I fill them in or scrape them off).

This was my last project, but I'm working on others:
http://i984.photobucket.com/albums/a...N/100_4607.jpg

That kit cost me less than $10, for a few weeks of fun. Good return on the investment :grin:

This one's a little bigger, in 1/48th
http://i984.photobucket.com/albums/a...1/100_3024.jpg

Maybe my favorite kit. Less than $13, mixed all colors by hand using primary colors, first time using sand-paper, scratch-building a landing light and cockpit, masking canopy frames (one by one), and other techniques. I had tons of fun with this and I would do it ten times again.
http://i984.photobucket.com/albums/a...7/100_2196.jpg

So get out there and build some models! :cool:

15.Span_Valalo

06-01-2011 07:28 AM

Codex

06-01-2011 08:29 AM

Excellent models Valalo :)

Did you use a matt top coat on the 109?

15.Span_Valalo

06-01-2011 09:12 AM

Quote:

Originally Posted by Codex (Post 291790)

Did you use a matt top coat on the 109?

ATAG_Dutch

06-01-2011 11:29 AM

Lovely looking models chaps, and you're starting to get me interested again.

There's an unbuilt 1/48th Eduard Sturmovik with etched fret flaps and bomb bays sitting on a shelf that's starting to speak to me from afar.......................:)

Codex

06-01-2011 12:06 PM

The Tamyia top coat gives the best overall look of painted metal IMO.

A little suggestion, before applying decals and the top coat, lightly and I mean LIGHTLY sand the whole plane with a 1600 grit sand paper or polishing paper, it takes away the roughness of the matt paint and makes the paint smooth, then apply the decals and top coat.

http://www.sisweb.com/micromesh/

Great Me-110 by the way!!!

Oh that's it, I'm hooked again, this weekend I'm finishing off my Fw-190D

lothar29

06-01-2011 12:19 PM

I am Modeller des of for many years, I have some posts work at the site of SAS and in AAS, here I leave a link to my PHOTOBUCKET so they can see my work

http://i914.photobucket.com/albums/a...inalizada2.jpg

http://i914.photobucket.com/albums/a...inalizada4.jpg

http://i914.photobucket.com/albums/a...inalizada9.jpg

http://i914.photobucket.com/albums/a...rminado3-1.jpg

http://i914.photobucket.com/albums/a...rminado5-1.jpg

http://i914.photobucket.com/albums/a...rminado2-1.jpg

15.Span_Valalo

06-01-2011 12:29 PM

lothar29... great job and very nice...

Katana1000S

06-01-2011 12:31 PM

Great models Guys ... I'll be grabbing the Tamiya 1/32 Mustang once its out, Revell will shortly have a 1/32 HE-111 out that is very reasonably priced when you consider the size it will be, have their 1/32 JU-88 and the quality although not quite up to Tamiya standard is still excellent.

Here is a test one built up http://www.hyperscale.com/2011/galle...11p132dw_1.htm

And sprue test shots ...

http://www.ipmsdeutschland.de/FirstL...P_32_TS_2.html

Codex

06-01-2011 12:31 PM

WOW...Thats a great 190. Which kit is that? Fantastic detail in the cockpit!

Langnasen

06-01-2011 01:06 PM

Some quality jobs there guys. I especially like the Fw. :)

Cockpit of the Zero I did some years ago, Tamiya 1/32nd. I'm more into armor these days.

http://i499.photobucket.com/albums/r...zero/kok01.jpg

http://i499.photobucket.com/albums/r...zero/kok02.jpg

whatnot

06-01-2011 06:41 PM

Quote:

Originally Posted by Romanator21 (Post 291707)

I don't know exactly what you're looking for in terms of detail or accuracy (a p-38 without 3 engines? ;) ), but you can certainly purchase pre-built or nearly pre-built models.

What I mean is planes like this. Do such exist? Ones that come built in a package made of metal with all the moving parts and details. I don't want a model to put on a shelf, I want a toy with details that I wouldn't have to build.

Trooper117

06-01-2011 06:50 PM

Quote:

Originally Posted by Langnasen (Post 291873)

Wow.. great detail. You are to be commended!

LcSummers

06-01-2011 06:56 PM

The only bad thinga about 1/32 models is YOU NEED MUCH SPACE but i love them.

Cool pix. Just go on.:-P

Romanator21

06-01-2011 07:31 PM

Quote:

21st Century toys make models like that - the gear can be folded or retracted, the bombs or drop tanks can be removed, the canopy can open, and the pilots are fully articulated for posing. They are not metal though. Metal models are usually smaller, like 1/72 scale and have little or no moving parts.

You only have to attach the wings with a screw provided (let's face it, planes are not as compact as cars). No gluing, building, or painting required.

http://smalljoes.com/images_gen/XD10...0063_large.jpg

http://smalljoes.com/images_gen/XD10...0063_large.jpg

In addition to the above, this model has opening gun bays, moving ailerons, and slats. For all that under $80, it would make a great gift/toy I think.

All times are GMT. The time now is 04:55 AM.