? about Saitek Pro Flight Switch Panel ???
 

can any of these panels, gauges etc work with COD?

Saitek Pro Flight Switch Panel

Saitek PRO Flight TPM System

would make the game so much more fun and easier than having tons of damn key binds.

thanks

I'm not sure but it looks to me that it should work. It probably just works like the extra buttons on your joystick which are assignable.

Maybe the following helps for you. I use a x52 pro joystick which can be assigned a lot of functions already. But for most functions I have also keyboard bindings which I have assigned as follows. For example, I use "q" for prop pitch. To set the prop pitch higher I use q+hat switch right and for lower I use q+hat switch left. The same counts for mixture which has "w" assigned. This way I have to remember only one key per function and all functions can be used in the same consistent manner. The same system should work with almost every joystick.

The only drawback with this system is that I can't assign any profiles to my x52 pro joystick because they don't work with joystick and keyboard combinations simultaneously.

What an intelligent solution!

i use the x52 as well, i will try some things out

Does anyone know if an MDF extractor can be used to move the cockpit controls to a small touchscreen monitor?

Well, this is how I solved the problem of too many keys to bind (although it took a bit of work :) ).
Couple of microswitches, toggle switches and Universal Joystick Controller BU0836X

http://dl.dropbox.com/u/9916878/download.jpg

using keyboard and x52
 

You can use the keyboard and the x52 pro by using the programing soft ware that comes with the x52. You just map the key you want in the game I.E. "g" for toggle landing gear then use the Saitek program to create a profile that maps a joystick key to "g". That way you can press either the keyboard or your joystick button.

I'm using the x52 pro modded to 18inch stick extention. I've taken the "twist" rundder control pot out of the stick and mounted it beside the throttle to use as a rudder trim as I have the rudder pedals as well. I also use the Pro Throttle quadrant as which has 3 axis for Prop Pitch, Mixture and Radiator. Except for the shape and colors you have all the levers that you would in the cockpit.

Yes, but that's not what I suggested and how it works in my case. If you use X52 profiles, you can't use combinations like "q+hat switch left" and "q+hat switch right". And using this method of binding makes it much easier and consistent to remember all the bindings. Besides, this way you don't run out of keys on your keyboard that easily.

However I use one X52 profile for binding the joystick to the F12 key to centre my TrackIR. The F12 key is just too far to reach without leaning over when my joysticks are on the table. I switch to that profile on the fly when needed. But that's besides the point. This thread was about managing your key bindings as easy as possible.

In my example of "q+hat switch left" I kept it as simple as possible because I think it's best that everybody comes up with his/her own key combinations. In that way I forgot to mention that I use "q+hat switch down" for automatic pitch and "q+hat switch up" for feathering the prop. This way you have already 4 bindings and you have to remember only 1 key for all things that have to do with prop pitch. This system works perfect when you keep it consistent for other functions (left=lower, right=higher, down=automation, up=emergency). I hope I've made myself clearer.

That's a really good idea! Do you know if it's possible to use more of these units simultaneously. The possibilities would be endless.

holy shit man thats bad ass lol. what would you sell one for? lmao

This is all Greek to me. You mean there is no commercially available products that already do this?? You have to build one from scratch?

Sure there are; Saitek, CH, Logitech, just to name a few make all sorts of stuff, but it's expensive and is often "not quite right" for a given simmer's needs. For instance I'd love a dedicated set of trim wheels, and if I want it I'm going to have to build it. It'll be expensive and time consuming, but it'll be pretty close to what I want!

Many of the guy's here are pretty hardcore. I for instance have been into flightsiming for well over 10 years, and I don't see that as changing, so spending a little time building a "button box" or even an entire cockpit isn't so out of line for us. That's where these answers come from.

http://i122.photobucket.com/albums/o...h_DSCF0012.jpg

I'm liking this a lot. I believe you've inspired me. How did you do the faceplate?

It's just printed on paper and then sprayed with several layers of clear coat. :)

I went for a low budget/quick solution since the BU0836X is relatively expensive piece of electronics (worth every penny). the other alternative was to go to a print shop and have the paper plasticized, but this turned out good enough :)

This is brilliant, Got me thinking...

I have the Saitek pro flight switch panel and at the moment it doesnt work in CloD. Its buttons dont get recognized. Would love to know if this will be supported soon.

Winger

thanks man thats the answer i was looking for yes or no, i know not to spend 100 bucks on one now.

Yah. Ill send mine back tomorrow. Just bought it so no biggie.

Winger

Chaps

Back to the original question...

Can the Saitek Switch Panel be used with either IL2:CloD or IL2:1946?

I have acquired one but it doesn't seem to work like a USB Joystick device...

Prior to this I have built a left console using the guts of a basic joystick which was much cheaper than the Universal Joystick Controller BU0836X. I designed it to bolt to the Saitek Throttle Quadrant Desk Clamp.

http://616sqn.tidesofwar.net/pics/consol.jpg

I designed some electronics to use all 8 point of views and to have a Jettison all that operates both the Tank and Bomb at once wihout using another input.

Gos

The Saitek Pro Flight modules are for FS only. You can't use them in any other game. Exception is the Saitek Pro Flight TPM System.

Hmmm - Bit gutted as it would be really useful.

I have heard someone has made it work for X-Plane. I am hoping that someone might look at this to make it work for IL2:946 and IL2:CloD