Official Fulqrum Publishing forum

Official Fulqrum Publishing forum (http://forum.fulqrumpublishing.com/index.php)
-   IL-2 Sturmovik: Cliffs of Dover (http://forum.fulqrumpublishing.com/forumdisplay.php?f=189)
-   -   For the Developers: wrong 3D model of Bf 109F in Il-2: BOM pictures (http://forum.fulqrumpublishing.com/showthread.php?t=35948)

Kurfürst 11-13-2012 01:17 PM

For the Developers: wrong 3D model of Bf 109F in Il-2: BOM pictures
 
2 Attachment(s)
Dear Developers,

I have noticed a graphical bug on the (work in progress) Bf 109F screenshots published of the Il-2: Battle of Moscow. It appears that the 3D model of the 109F has a slight issue, namely that the radiator flaps are missing a detail on the otherwise highly detailed 3d model.

The radiator ducting on the 109F had a split arrangements, with a separate boundary layer separator duct running above the coolant radiator and discharging the slower boundary layer through the upper radiator flaps, in order to reduce drag and improve radiator effectiveness.

This was deleted on the subsequent 109G and K model. However, the 109F 3d model in Il-2 BOM lacks this details and effectively shows the radiator setup of the 109G instead.

Please check the attached images below and if possible, fix this during the development.

Osprey 11-13-2012 01:19 PM

Work has finished on this @ 1C so.....

Continu0 11-13-2012 01:22 PM

Osprey, where did you get that from? I heard it too, but i am interested in other sources.

The 109F-Bug was reported to the 3-D modelers afaik. B6 stated that they know about it.

Osprey 11-13-2012 01:25 PM

Well you'll have to try the ATAG or SIMHQ forums because discussion here about that isn't allowed.

Continu0 11-13-2012 01:29 PM

Thx.

From the German Ubi-Forum I heard (yesterday) that work continues, but with 777-Studio-Members.

Luthier seems to have left 1C and is working on a Korea-Project with another engine.

http://forums-de.ubi.com/showthread....nd-12-Nov-2012

Kurfürst 11-13-2012 01:40 PM

Pff. That's sad news.. :(

Continu0 11-13-2012 01:43 PM

Quote:

Originally Posted by Kurfürst (Post 480749)
Pff. That's sad news.. :(

yes it is, but as nothing is official so far, you can still hope it is only rumors;)

Osprey 11-13-2012 03:27 PM

With PR this bad it will always be rumours.

Trumper 11-13-2012 03:29 PM

Quote:

Originally Posted by Kurfürst (Post 480749)
Pff. That's sad news.. :(

Is it really sad,this management made a complete pigs ear of this sim ,hopefully someone can step in and complete it.

ATAG_Colander 11-13-2012 03:33 PM

Quote:

Originally Posted by Continu0 (Post 480744)
From the German Ubi-Forum I heard (yesterday) that work continues, but with 777-Studio-Members.

Partially correct. It does not "continue" per se as sadly, the CLOD engine has been canned.

Quote:

Originally Posted by Continu0 (Post 480744)
Luthier seems to have left 1C and is working on a Korea-Project with another engine.

I really hope this is true, wish him the best of luck and offer my full support.

Also, I wish all the ex MG employees the best of luck in their new jobs (for those who got transferred) and finding a new job (for those who did not get transferred)


All times are GMT. The time now is 06:34 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.