Hmmm.... Are you sure this is the logfile you are talking about?
LOGFILE= has a setting and it says "log.txt"

[Console]
IP=20001
UseStartLog=1
WRAP=1
PAUSE=1
HISTORY=1024
HISTORYCMD=1024
PAGE=20
LOG=0
LOGTIME=0
LOAD=console.cmd
SAVE=console.cmd
LOGFILE=log.txt
LOGKEEP=0


I thought we are discussing about the dump files that are in the directory
...\Documents\1C SoftClub\il-2 sturmovik cliffs of dover\cppcrash

~S~

Force Feedback initialisation fails..
 

as said... when using MS Sidewinder FFB2 under Win7/64 the centering force is not present first, when you start flying, until you do some hard maneuvre which causes a Forcefeedback effect and then suddenly also the centering kicks in...
Its a minor annoyance but should be really easy to cure... you just forgot to initialise the joystick with a first impulse...

AMD Crossfire on 5970 is not working for me without helper programm...using Radeon Pro and Lost Planet DX10 profile gives EXCELLENT crossfire performance !! Steady 60 fps low over ground... and 50 to 60 flying over London (medium settings for landshading and buildings)... so it can work !!!
Unfortunately when leaving the first mission, going to menu and back into another mission crossfire seems lost and its back to 23-45 fps and stutters...
So please, why cant you learn to implement Crossfire properly or make AMD publish a profile ??!! It would sooo helpfull for some...

Nope

They were full blown missions approx 30 of them.

The soft club folder is overwritten when CoD is started.

:-(

Noticing drastic drop in frame rate, right down to 1 FPS when pulling behind 109 in dogfight. Never had this problem before.

Uhh, anyone else suffering an Acid Flashback?? lol
What should i do to prevent it from doing this..
I am using an Nvidia Geforce 580 GTX with the newest Beta drivers..

PS, it was doing this BEFORE as well with the old current drivers (non-beta).


http://img593.imageshack.us/img593/4488/il2acid.jpg

Disabling the anti epilepsy filter in your ingame graphicssettings should fix that.



Bugs I've noticed while playing online up to here :

-Autorudder works in Full-switch servers (imho this should be a serverside option)

-Clouds still cause black and white flickering when flown through, seems more noticeable with Vsynch off and wasn't happening in the first release. (ATI only?)

-Ghost dots/formations apparently still exist online. Possibly related are the floating ships that often appear. Can happen right after logging in or after a while. Seems to be some desynch of certain parts that causes it.

-When flying the Hurricane with the canopy open engines of hurricanes and spitfires in close formation sound as if they cut out, even if they are running fine and at full throttle. (confirmed by someone else too, not tested while flying other planes or with different planetypes flying nearby)

-109 landinggear bug where the visuals show the landinggear to be down but the player has them up. (E4 only?)

-Crashlogs are often 0kB and thus useless.

-Mirrors are useless as they show a blocky and blurry image with no detail whatsoever. (possibly an ATI-only bug?)
Sometimes when you spawn they need 2 keypresses to be disabled ,sometimes just one..when it needs 2 keypresses the image switches to a even blockier setting.

-Blue lines on the horizon with ATI-cards are back, although less visible than in older patches.

Correct me if I am wrong, but I do believe it's just the version number, i.e. dx10.0, dx10.1 and dx11. I did try both 10.1 and 11 at some point but since these do not seem to be supported by the game yet it gave me a performance decrease/stuttering and lines on the water in the distance.

I might try entering dx10.1 again since I tried it before the beta patches were out and see what happens.

I'm fine with it being available on bombers, but right now you can fly any fighter and enable autorudder 1 or 2 and the rudder will automatically move to negate any slip. Fe if you bank left to turn the rudder will move without any input depending on your bankangle.
It does stop you from being able to do proper rudder manoeuvres because when switched on it will negate any rudderinput you make within milliseconds and "trim" your fighter perfectly...so perfect rudder trim comes at the cost of losing the ability to manually use the rudder.

Only found out by accident as I had pressed the key inadvertedly while flying and my rudder input stopped working...but this shouldn't be available on fighters in full-switch servers.
Don't mind it still being available in bombers together with the course autopilot though.

Weird wires:
http://i.imgur.com/YnBhr.jpg
http://i.imgur.com/wO1qb.jpg
Landing on the sea
http://i.imgur.com/ZFq7y.jpg

Thats well harsh. But its all work in progress, now lets stop whining and look forward to the next update.