Official Fulqrum Publishing forum

Official Fulqrum Publishing forum (http://forum.fulqrumpublishing.com/index.php)
-   IL-2 Sturmovik (http://forum.fulqrumpublishing.com/forumdisplay.php?f=98)
-   -   Thanks mr maddox (http://forum.fulqrumpublishing.com/showthread.php?t=17018)

Flanker35M 10-20-2010 10:11 AM

S!

That is an issue maybe TD could look into in the future patches? I have not encountered invisible trees except the forests at certain angle.

winny 10-20-2010 11:50 AM

Quote:

Originally Posted by swiss (Post 191169)
Which video card and CPU have you installed?

I'm running it on a laptop.. It's an AMD64x2 1.9 GHz and the Video is NVIDIA 7000M.

swiss 10-20-2010 01:09 PM

ok, winny,

conf.ini vs ingame options screen:
Any change the options screens adjusts values in the conf.ini.
In conf itself you can adjust it more precisely, plus certain values are not available through the ingame screen(like wide screen settings).
So if you decide to work with the conf, you should never ever again use the ingame screen as any changes there influence all kinds of settings in the conf - and might set them back.

values:
0: off
1: on
2/3/4: generally, the higher the better (water: ATI users can only use 2, same effect as 3 for NV)

If you start to play around with conf, make sure you copy it to a safe place first.

When changing the values, you usually don't know how bad the fps drop, therefore I suggest you test it with the "black death" .ntrk.:
In game press shift+tab, then enter:
fps START SHOW
actual fps will be displayed on top of screen
[to turn it off: fps STOP SHOW]

This link is google translated, but I think you can get the necessary informations out of it.
http://translate.google.ch/translate...n&hl=&ie=UTF-8


Concerning your system, I really don't think you can max out too many things. There weren't much infos about your GPU, but it sounds rather weak.
Well, you'll see - trial and error. ;)


edit: while searching for your gpu and il2 I found this site: http://www.theblackfedora.com/index....d=17&showall=1
Awesome amount of info!

winny 10-20-2010 01:12 PM

Quote:

Originally Posted by swiss (Post 191235)
ok, winny,

conf.ini vs ingame options screen:
Any change the options screens adjusts values in the conf.ini.
In conf itself you can adjust it more precisely, plus certain values are not available through the ingame screen(like wide screen settings).
So if you decide to work with the conf, you should never ever again use the ingame screen as any changes there influence all kinds of settings in the conf - and might set them back.

values:
0: off
1: on
2/3/4: generally, the higher the better (water: ATI users can only use 2, same effect as 3 for NV)

If you start to play around with conf, make sure you copy it to save place first.

When changing the values, you usually don't know how bad the fps drop, therefore I suggest you test it with the "black death" .ntrk.:
In game press shift+tab, then enter:
fps START SHOW
actual fps will be displayed on top of screen
[to turn it off: fps STOP SHOW]
This link is google translated, but I think you can get the necessary informations out of it.
http://translate.google.ch/translate...n&hl=&ie=UTF-8


Concerning your system, I really don't think you can max out too many things. There weren't much infos about your GPU, but it sounds rather weak.
Well, you'll see - trial and error. ;)

Thanks.. it is a bit weak, I'm waiting for some SoW specs before I spend any money!
I'll have a play around.

swiss 10-20-2010 01:15 PM

edited my post, see bottom

winny 10-20-2010 01:44 PM

Quote:

Originally Posted by swiss (Post 191240)
edited my post, see bottom

Wow... I know what I'll be doing later, thanks again.

IceFire 10-20-2010 01:58 PM

What does LandGeom=3 do? I checked mine and even with my settings at the highest possible... I have only 2 there. I changed it to 3 and it doesn't look any different...

Flanker35M 10-20-2010 03:04 PM

S!

LandGeom=3 enables the longest visibility range of 72km together with VisibilityRange=3. This only on Perfect settings.

swiss 10-20-2010 03:06 PM

Quote:

Originally Posted by philip.ed (Post 191110)
Aviar, would it be:

Forest=3
Forest=4

?

Maybe I'm stupid - I still don't get it.

IceFire 10-20-2010 03:25 PM

Quote:

Originally Posted by Flanker35M (Post 191260)
S!

LandGeom=3 enables the longest visibility range of 72km together with VisibilityRange=3. This only on Perfect settings.

Ahhh only together. Got it.


All times are GMT. The time now is 05:09 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.