Official Fulqrum Publishing forum

Official Fulqrum Publishing forum (http://forum.fulqrumpublishing.com/index.php)
-   IL-2 Sturmovik (http://forum.fulqrumpublishing.com/forumdisplay.php?f=98)
-   -   1946 - where to start? (http://forum.fulqrumpublishing.com/showthread.php?t=23410)

Bearcat 07-27-2011 05:03 AM

Quote:

Originally Posted by Ze-Jamz (Post 291589)
Dont forget Ultrapack3.0 too mate..Just as good as HSFX

That's debatable.. Highly.

Enjoy the sim Orpheus.. and I hope ypu made your stock backup. All it will take is having to reinstall the sim once to help you see the plusses associated with doing that.

MadBlaster 07-27-2011 10:22 AM

Quote:

Originally Posted by Orpheus (Post 315430)
Hi chaps another question - I've just installed UP3 RC, which is great - but when I play the RAF quick missions (which are supposedly over places like Manston etc), it puts me over some Finnish map instead of the Channel. I guess I'm missing a Channel map... any thoughts? :shock:

Lol. Hi Orpheus. Your probably not missing the channel map. If that is a mission you got from mission4today, it might be an older mission made by someone before the channel map was created by the modders. So, they picked a map at that time that simulated the geography as best as possible for the scenario. I remember running into this a while back. If it is a DGen scenario, that doesn't use the mod maps at all as far as I know. I think there are some DT single missions with their maps in there? Some with the HS129 I remember off hand.

To be sure about the map, you can check by going into full mission builder. You should see the channel map in the list and be able to load it up. If you are missing it, you can report it at UP website and maybe they can help you figure it out. The word is that the final release is coming out in a few weeks. When you get up to speed, join the party online at WoP!

Orpheus 07-27-2011 05:05 PM

Quote:

Originally Posted by Bearcat (Post 315463)
That's debatable.. Highly.

Enjoy the sim Orpheus.. and I hope ypu made your stock backup. All it will take is having to reinstall the sim once to help you see the plusses associated with doing that.

Sure have, it's already saved me once or twice ;)

Quote:

Originally Posted by MadBlaster (Post 315582)
Lol. Hi Orpheus. Your probably not missing the channel map. If that is a mission you got from mission4today, it might be an older mission made by someone before the channel map was created by the modders. So, they picked a map at that time that simulated the geography as best as possible for the scenario. I remember running into this a while back. If it is a DGen scenario, that doesn't use the mod maps at all as far as I know. I think there are some DT single missions with their maps in there? Some with the HS129 I remember off hand.

To be sure about the map, you can check by going into full mission builder. You should see the channel map in the list and be able to load it up. If you are missing it, you can report it at UP website and maybe they can help you figure it out. The word is that the final release is coming out in a few weeks. When you get up to speed, join the party online at WoP!


Hmm, ok. It's not a downloaded mission as far as I know, I wiped my whole install (Steam version), patched it to 4.10.1 or whatever the latest version is and installed UP3 RC. These missions look like an entire campaign, but listed under 'bob' under RAF side single missions.. pretty sure it's stock (steam version has all the expansions I think) as I seem to remember this happening when I first started trying the game.

In the QMB I don't have an option for a UK Channel map at all, not looked in the FMB yet. Something wonky going on though.. suppose I'll need to download one but which one to get - and will it be the version the mission is looking for? I have no clue about the FMB at all I'm afraid!

MadBlaster 07-31-2011 11:00 PM

I'm probably totally off base. I do remember there is a BoB campaign at M4Today. It was a 2 part. The first part was the luftwaffe side, the second part was "spit & fire" and used the Kuban map to mimic Great Britain topography and the english channel because there was no channel map to use, so the mission maker used that instead. Anyway, you would have saved it to RAF/bob folder if that was the case. That is what I was going off of. So I was thinking that somehow was included in your steam version, or left from a previous installation somehow.

The QMB doesn't have any of the channel maps as far as I know. Only the ones listed in the drop down menu.

The FMB, you go to file\loadmap...then you see a list of a bunch of maps...scroll down to western front...you should see a whole mess of channel maps available.

Orpheus 08-01-2011 08:01 PM

Quote:

Originally Posted by MadBlaster (Post 317612)
I'm probably totally off base. I do remember there is a BoB campaign at M4Today. It was a 2 part. The first part was the luftwaffe side, the second part was "spit & fire" and used the Kuban map to mimic Great Britain topography and the english channel because there was no channel map to use, so the mission maker used that instead. Anyway, you would have saved it to RAF/bob folder if that was the case. That is what I was going off of. So I was thinking that somehow was included in your steam version, or left from a previous installation somehow.

The QMB doesn't have any of the channel maps as far as I know. Only the ones listed in the drop down menu.

The FMB, you go to file\loadmap...then you see a list of a bunch of maps...scroll down to western front...you should see a whole mess of channel maps available.

Thanks Madblaster... yeah you're right, no channel maps in the QMB (seems odd but hey ho). They're definitely there in the FMB though, several versions date-coded (e.g 1941-43 or similar, I forget exactly what now) with winter/normal variants.

The BOB mission set.. I have no idea. I did install an RAF campaign from M4T the first time around but I've had a full wipe/reinstall for UP3 so I'm sure it's not that. The missions themselves seem to be exclusively piloting Hurricanes. I did see a few forum posts after a bit of googling that seemed to state that this campaign (if it was the same one!?) used the Finland map for the first mission only, then reverted to the Channel map for the others... but after a bit of playtesting (first 2/3 missions), each mission has been on the wrong map. I kinda planned to just give up on the SP and try MP but I assume the mods mean online with 1946 is a no go (and that's half the fun!), and I have no idea how hyperlobby works or what it is.

Cheers for trying... I should try the UP forums but I swore I'd stop signing up for new forums (lol), and since the moderators over at the Cliffs of Dover forums have now restricted any dissenting opinions to a 'naughty corner', my enjoyment of both games and respect for 1c as a company has dropped through the floor. Bit of a shame after only managing one online flight in CloD and none in 1946, but I no longer want to support either 1c or Maddox games as a matter of principle. CloD is permanently shelved and 1946 is just... confusing.. if I can't fly a RAF campaign over a Channel map then it doesn't give me a huge amount of hope for the rest of the game. :(

Thanks to all those who helped and offered hello's and advice, and many years happy flying to you all. Maybe see some of you in another sim one day.

Salut!

Bat*21 08-02-2011 11:09 AM

Quote:

Originally Posted by Orpheus (Post 318037)
Thanks Madblaster... yeah you're right, no channel maps in the QMB (seems odd but hey ho). They're definitely there in the FMB though, several versions date-coded (e.g 1941-43 or similar, I forget exactly what now) with winter/normal variants.

The BOB mission set.. I have no idea. I did install an RAF campaign from M4T the first time around but I've had a full wipe/reinstall for UP3 so I'm sure it's not that. The missions themselves seem to be exclusively piloting Hurricanes. I did see a few forum posts after a bit of googling that seemed to state that this campaign (if it was the same one!?) used the Finland map for the first mission only, then reverted to the Channel map for the others... but after a bit of playtesting (first 2/3 missions), each mission has been on the wrong map. I kinda planned to just give up on the SP and try MP but I assume the mods mean online with 1946 is a no go (and that's half the fun!), and I have no idea how hyperlobby works or what it is.

Cheers for trying... I should try the UP forums but I swore I'd stop signing up for new forums (lol), and since the moderators over at the Cliffs of Dover forums have now restricted any dissenting opinions to a 'naughty corner', my enjoyment of both games and respect for 1c as a company has dropped through the floor. Bit of a shame after only managing one online flight in CloD and none in 1946, but I no longer want to support either 1c or Maddox games as a matter of principle. CloD is permanently shelved and 1946 is just... confusing.. if I can't fly a RAF campaign over a Channel map then it doesn't give me a huge amount of hope for the rest of the game. :(

Thanks to all those who helped and offered hello's and advice, and many years happy flying to you all. Maybe see some of you in another sim one day.

Salut!

If you don't want it anymore I'll take your CloD off your hands ;)

Artist 08-02-2011 12:09 PM

Quote:

Originally Posted by Orpheus (Post 318037)
[...]no channel maps in the QMB (seems odd but hey ho). They're definitely there in the FMB though, several versions date-coded (e.g 1941-43 or similar, I forget exactly what now) with winter/normal variants

What maps show up in the QMB is configured in some .ini-File (cannot remember which and where just now), which you can edit... If I remember I'll post it here...

Artist

Edit. Look here
http://www.sas1946.com/main/index.php?topic=17089.0
and google "(IL-2 OR sturmovik) maps QMB ini"

MadBlaster 08-02-2011 02:13 PM

Quote:

Originally Posted by Orpheus (Post 318037)
I kinda planned to just give up on the SP and try MP but I assume the mods mean online with 1946 is a no go (and that's half the fun!), and I have no idea how hyperlobby works or what it is.

Salut!

Okay. In case you change your mind.

For online play, I would highly recommend here http://www.warbirdsofprey.org/ There's at least one channel map mission going on at least once a day, if not more. The missions swap out every two hours. The guys there do a good job putting together missions and it is very popular place to play online. They currently run UP3 RC4 on two mod servers (ETO and PTO) and one stock game server 4.10.1m. The mod servers are the most popular though. It's all objective based, but you can do what you want. So if you just want to furball, you can to that. But you can't perch/vulch the bases, per server rules.

Hyperlobby, you don't really need it. Just put in the IP address box directly to connect. Hyperlobby is a nice tool though. If you like to chat and ask questions and like to see all the servers that are hosting and the settings they use. But certianly not required for online play.

For offline, I think probably over the next few months, the guys that are still into offline play (e.g., M4Today) will eventually be updating their missions and campaigns for UP3. The problem is UP3 is not quite yet finalized (Beta). They are working out the final bugs and the final version should be due out in few weeks or so.

CLoD, a lump of virtual earth. I've lost interest. But mod 46', that's still a very good game and only getting better imo.;)


All times are GMT. The time now is 02:03 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.