OK Nigelmcelwee, last time I told you
Now with SLI somewhat working (it is a fix, not an official solution) I start seeing GPU at 99% and temperatures going up to 88°C
I admit I got a bit worried.... ;)

SLI fix is at: http://forum.1cpublishing.eu/showthread.php?t=23199

(Did not have time to make a long test and see where the temperature stabilised)
EDIT: After some tests, my GPU temperature remains constant 88°C this is good enough and within specs so no worries.
But, if I open the case and the side fan does not push fresh air to the GPUs' fans, temp will jump above 93° immediately!
So streamlining the fresh air inside your case guys, especially if you run SLI or triple-SLI configurations will be something to cautiously watch guys!

3840x1024 desktop, 3072x1024 game, far right my GPUs % and temp
http://www.stoimenos.com/temp/CoD/Co...072x1024_1.jpg

3840x1024 desktop, 3072x1024 game, far right my GPUs % and temp
http://www.stoimenos.com/temp/CoD/Co...072x1024_2.jpg



~S~


PS. Luthier, please give us back the Use3Renders=1 command so that all of us with three monitors can enjoy some decent gaming!!!!!

Maybe not with the anomaly that is CoD, but without vsync the GPU should work at 100% to pump out as many frames per second possible.

The OP could try enabling Vsync to limit his FPS, that might give the GPU a break. Otherwise, take everyone's advice and your rig should look something like this:


http://www.pclaunches.com/entry_imag...mb-450x231.jpg

lol :-P

~S~

I like that photo, that looks like perfect rig for "flying" simulator, imagine having prop pitch for all those fans...

Drag your fridge into room were computer is, take door of fridge put computer inside.... solved :)