You didnt even bother to read my posts.

Well then I'm sorry I tried to answer your question.

btw in your first post you posed the problem and asked "Can this be edited in the conf, or is there another fix?"

I suggested turning off the things that annoy you

In your second post you said you didn't want to, you wanted them to be available (which kind of conflicts with what you are trying to achieve).

I suggested some alternatives

In your third post you said "No luck so far with the conf..." but didn't even say what you had tried (I still don't know).

I asked, knowing that some people hadn't realised there was a conf.ini in two places,
had you tried the (effective) one in your User folder and posted my details as a prompt.

So which post didn't I read?

It doesn't really matter to me either way but when you ask a question and someone tries to help but doesn't give you the answer you want to hear it doesn't do any good getting upset about it. If some posts don't help just let them go by.

You apparently didnt even understand the issue.

I'm not here to be insulted or flamed. I asked a question, how to make il2:clod run in a true full screen mode instead of pseudo-window that is seemingly behind everything else whenever theres activity in those windows.

You adviced me to shut down those programs, as because you flew full switch you'd only have the game and voice comms to concentrate on. Real constructive!

Tweaking conf didnt work, so now its true windowed screen forced to 1680 x 1050. Hate the frames, but what can I do?

What's happening. Im trying setup my graphics settings and game just crashes to desktop?








i7-950, 8GB DDR 3, GTX 295 , Win7 64 bit

i bought this game today, after activating it on steam and trying to run the game i simply get this screen and i hear my computer fans running faster but nothing happens

http://i184.photobucket.com/albums/x...Untitled-1.jpg

what going on here and how can i fix it because i really want to play this game :)

The specs of my machine

Core i7 cpu, 6gb ram, nvidia gefore 560ti gtx, a few hundred gb of diskspace left

That's a decent enough PC spec Rinneh. That shouldn't be your problem.

Try going into Steam and validate your game installation in case you have a bad file somewhere (Library, Right Click on IL-2....CoD, Select Properties, Local Files Tab - click on Verify Integrity of Game Cache).
Have you got the latest Nvidia drivers?
Have you tried starting out with Video options set to, say, Low just to see if it runs ok at that then try upping the settings?

This is stupidly annoying. Everytime, I launch CoD. I'm greeted with a black screen.

http://dl.dropbox.com/u/19196889/Lau...2-43-03-46.jpg

http://dl.dropbox.com/u/19196889/Lau...2-43-15-28.jpg

I'm currently using an ATI graphics card.

cockpits with bad textures
 

hello

i just recently bought this game and installed the updates from steam. as soon as i start the game the cockpits always come in many colours like tiny dots or red yello and other's many of the gauges are unreadable .

i updated the drivers of my video card and still i have this problem.

my video card is nvidia GTX 550 TI

any help pls?

regards
Daniel

I'd like to know this too. I run the game from Steam, with an NVIDIA GTX 460 graphics card.

I have not had any problems before, but I recently bought a new monitor and increased the resolution to 1920x1080. Now I have the same dots and strange graphics inside the cockpit as ripmax has. Everything else looks fine.

EDIT:

I found this thread: http://forum.1cpublishing.eu/showthread.php?t=27437, and can confirm that the problem goes away if I turn off the epilepsy filter. Why is this suddenly a problem for me? Does the increased resolution cause these kinds of things with the epilepsy filter?

yes turn off the epilepsy filter solved the problem but the game is really lagging with my system.

intel i5 3.2ghz

1g ram graphics card

direct x 11

whats else one needs to run this game properly???
i even overclocked the card from 900ghz to 1000 and same results

what are the recommended specs to this simulation properly?!!
the real specs!

Thanks for the update Luthier, good to hear what is being worked on.

For the trees, (is speed tree being used?) why not just create a hitbox around their center and generate it when a plane gets close to/within a certain range of a tree.http://forums.nichechoppers.com/imag...ine=1292495981
http://www.bingertoday.info/huang2.jpg
http://www.bingertoday.info/huang3.jpg

Hi, I love the il2 series but this is the first one that I am having a problem with. It seems that I can load the game fine and go to the selection screen. The problem I am having is that none of the video works. When I go to quick launch, I cannot see the map, and when I go to view my aircraft before flight I cannot see it at all either, they both appear as a black box. When I ignore that and just try to fly, I can’t see anything, all I see is my desktop, but I can still hear my plane and when I move controls I hear the plane react too, just can’t see it.

I thought this was my problem
"3. Q: I see a black screen when launching the game.
A: You are most likely running an Nvidia card with 266.xx drivers. There's a problem with that particular driver version.
It can be resolved by either rolling back to a previous driver version, such as 257.21, or upgrading to the just-released 270.51.
The issue can also be resolved by manually adjusting one of the driver parameters in the registry. This is for more advanced users. Please modify the registry at your own risk.

Start - Run
regedit
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\GraphicsDrivers
Edit - New - DWord
Name = TdrDelay
Value Data = 12"

But after upgrading to 285.xx the problem still existed and I modified the registry and that still did not work, so maybe I have a new problem or I just don’t see it. If I could get help with this it would be great, I would really love to play the game.

If needed my specs are
Windows 7 64bit
Nvidia 230m driver 285.62
6gigs of DDR3 ram
if anything else is needed just let me know

Looks like you have a laptop?

I can't say for sure but on this performance hierchy:-
http://www.tomshardware.com/reviews/...ew,3107-7.html
the 230m doesn't appear but the lowest card supported by CoD is, I believe, the 8800 which appears on the list near the 260m so your GPU may be borderline.

Try the lowest settings in Options... Video to see if you get any improvement and then raise the settings from there.

Things to do in Video settings while testing: turn SSAO off, Forest Off, Grass off, Shadows off, Buildings Amount and Buildings Detail to lowest settings.

What is your Processor?

I wouldn't mess with the registry until all else fails.

Yes its a laptop, but ive never had a problem running anything else, in fact i run Battlefield 3 on it, granted its on the lowest setting but it still runs.

The video settings are all to the lowest and all the other settings are set to off.

Processor is a Core i7 Q720 1.6 GHz

The changes i did to the registry are all undone.

Sorry I can't really help much more other than to say try the latest drivers. Hopefully an ATI user will see this and comment.

Oh!, second thoughts, did you create a GPU profile for Launcher? If not are the default settings too high. Also you could try reducing the game resolution to reduce the GPU load. Your LCD screen will do the work of converting it to its normal resolution. It may not be great but it may help, at least as a test. You may also have a limit on the video RAM which is critical in this game. Under 1Gb and you will suffer. Can that be increased in any way?

I have a laptop with the i7 720QM @ 1.6Ghz but it has the ATI 5850 1Gb video card and runs CoD ok on 1900 res at Low to Medium settings with the usual suspects turned off: anti-epilepsy off (a must); grass off; shadows off; ssao off; buildings very low.

Its ok, thanks for trying.
Whats the GPU profile? And where do i find it?
I will continue to try.

You should have a Control Panel for your GPU (video card). In there you should find profiles for each application/game that ATI have created. It will set the optimum Anti Aliasing, Anisotropic Filtering, etc etc for each game. Usually you can add a new one if ATI haven't provided one (just click Add and find the programme you want to make a profile for, in our case, Launcher.exe in the folder
C:\Program Files (x86)\Steam\steamapps\common\il-2 sturmovik cliffs of dover
Then you can set your own settings and Apply / Save.
It's a while since I saw an ATI Control Panel so have a look and try to make what I said fit.

If you don't have a profile it will simply use the default settings and again these should be visible in the Control Panel.

Well I just tried that and it appears to have not worked. I will just assume that my graphics card just isnt enough to run it and wait for a patch or until i get to build my desktop, thanks for the help anyways.

CoD game crashes downscreen to "activity bar/field*"
 

Sorry I posted this on maybe the wrong thread yesterday, I think here is a the best choice? So I try again:

Hi, I am newbie to CoD from Sweden (sorry for my not perfect english, hope You understand) and have not yet learned more than doing basic flying in Hurricane, Me 109 and Spitfire in the quickmissions. A problem destroys the experience though
The game (I have the latest version via steam update, to this date = april 4th, 2012) every time after one to two minutes "crashes" down to the bottom of my screen, the bar/field there in Windows 7. I do not know its english name * for sure. Maybe it is the "activity field"/"activity bar"?

I.e. the game behaves as if I runned the game in a windoved mode and volontary "clicked it" down to the bar so I can see/use the windows desktop. It even has it's icon there and it comes up to normal when I click on it - and then I can fly for a minute again before it repeat the same problem. It makes learning the sim quite impossible. I do not have a clue what to do to fix this? Please help me if You can.
I start the game via clicking on the Icon, the comes the steam and then after shift+tab (it does not btw respond on that commando without multiple tries). I then come to the game proper screens without problems. I have tried the game in 1920 x 1200 and several other resolutions. Now I use 1600 x 1200 for better FPS with most videooptions maxed out. I have AA to 8x, disabled the anti-Ep filter, use SSAO and VSYNC (have tried all other combinations too, I think..). The problem is the same when I try it on fullscreen, pseudo or off.
I have no problems with DCS A-10C or Rise of Flight or other programs I have.

MY PC: MSI motherboard. AMD Phenomen(tm)II x6 1100T processor. 3,3 GHz. I have two AMD Radeon HD 6900grafic cards with cross-fire. 17 GB installed memory. I have Windows 7 Ultimate 64 bit. The game is installed in the standard way on my C-drive. My screen is a Samsung syncmaster with max resolution 1920 x 1200, 60 Hz. I use TM Hotas Warthog (mapped ingame for buttons and axes),Saitec Pro Combat rudderpedals and a Logitech G19 keyboard.
I have the latest driver for my graphics card says the program when I tried to update it (Advanced Micro Devices, Inc, date 2012-03-08, version: 8.951.0.0).

I just hope that someone here can give me advice what to do.
Best Regards, Michael E, Sweden

Problem solved!
 

Thank You klem!!!!!
Changing in conf.ini to: Render=D3D9_0 instead of Render=D3D10_0, made the trick. I now can fly the time I want to :grin:

Best Rgds // Michael E

Well it was a bit of a shot in the dark and for your card I don't think it should be necessary but the patch should sort that out when it comes.

Hope to see you online some day.

By the way you will probably still experience launcher crashes online after about 1-1.5 hours due to memory leak. Also being addresed in new patch.
__________________

same problem, aces high, rise of flight and warbirds all work well on my computer but this has just been a frustrating waste of time, lucky I only spent twelve bucks on it.

Hello

I have a different problem:

I've installed the game and the game works very quickly until I click "fly" for any missions. Then I just get sent back to the desktop but I hear the game running perfectly. Also when I press ESC I go back to the menu and the game works there. Also when editing skins, I don't see any pictures, just a black screen.

I'm running it on a Windows 7 computer with a intel HD 2000 graphics card @ 1.7GB

Ram 8 GB, intel i7 quad core 3.4 GHz processor, so the game should work.

Thanks for the help!

hmm,I like the forum
http://www.qmmv.info/12.jpg
http://www.qmmv.info/13.jpg
http://www.qmmv.info/14.jpg