Official Fulqrum Publishing forum

Official Fulqrum Publishing forum (http://forum.fulqrumpublishing.com/index.php)

- IL-2 Sturmovik (http://forum.fulqrumpublishing.com/forumdisplay.php?f=98)

- - RAM Questions... (http://forum.fulqrumpublishing.com/showthread.php?t=2834)

I won't be a problem to get 3gb detected. Now if you want it to work in dual channel mode I'm not sure if it would, if I'm not mistaken all your motherboard's manual mentions is to put same size sticks in their corresponding colored slots

If you got 4 slots you should be able to pair the modules, your manual should tell you wich slots to use.
so pair 2x1024 and 2x 512, aslong as there matched you should be ok.

If your running a 32bit OS there is no point in using more than 2Gb for a game because the OS can only asign 2Gb Max...

@whitesnake

"If your running a 32bit OS there is no point in using more than 2Gb for a game because the OS can only asign 2Gb Max..."

that is not correct, a 32bit OS can address 4 gB of Ram but because of needed Address translations it can effectively only use 3.5 gB of the 4 gB for programs.

Is there any technical reason that will justify to go for a 4GB RAM setup in a PC dedicated to almost exclusively play il2?

Now with 2GB Corsair 800MHz in Windows XP Pro.

Flying online with HL, Ventrilo or Teamspeak, TrakIR, usually il2 compare...
Can this be considered as multitasking?

Salutes, All.
http://www.websitetoolbox.com/tool/v...apin&id=332560

Quote:

Originally Posted by Solrac (Post 36911)

No, 2g is plenty for il2.

Quote:

Originally Posted by robtek (Post 36908)

I said it can only Asign 2Gb to the game, or any aplication, if you stick in 3 or 4Gb it will try to use that also but like you said it will only use 3.5Gb for Vista 32bit and 3Gb for XP 32bit, and still it will only asign 2Gb to an aplication maximum, meaning the rest will be left for system resources, and i dont think anyone running a 32bit OS will need an extra Gb or more for that.

With a 32bit OS you be much better of just buying a 2Gb Dual Channel kit of 2x 1024mb modules because it will give you the most value and speed for your money.

All my XP 32bit based rigs run 2Gb Dual Channel, and my Vista 64gb SLI rig runs 4Gb Dual Channel. non of my 4 computers have any problems running IL2-46 at the highest settings (including conf.ini settings) so i really dont see why sticking in more than 2Gb would help running IL2 better.