So does this mean that you do in fact have 1:1 throttle sensitivity? You may think it's a useless response but you'd be suprised how many people miss the little things that some of us see as obvious.

Also, I think it would help if you gave us a little more to go on. Your system specs and the joystick you are using for instance.

~S~

I had a bit of that issue as well, difficulty was on max so I thought that is the problem but no. My problem was floating slide bar on my Saitek x52wich was definite as a prop pitch in axes, as well as other floating parts of my x52, after I treat theme with wd40 it seems to be much better. Eventually I got proper input set from my joy but occasionally I got few seconds lag at output in the game that looks like joy malfunction. Issue here is that I can use joy in any other game with no problems... Hope I will sort it out soon...

Dev try the "antropomorph'' option and make sure its unchecked!

Ok well i discovered it is this option however when i deselect it and restart mission or game it resets itself again to being checked which is why i didnt think it would be this..

Is that the norm or are the realism settings sopposed to be saved from your last visit?

thks for help

same issue confirmed
 

Same problem for me. Impacts at least propeller pitch and throttle.
Would appear randomly in any kind of situation.

Regards

I have the throttle issue too. It is less pronounced after the patch but still there. Using an x52 pro with 'Anthropomorph' off. Specs should be in sig.

I also have this problem but something else aswell. If i put my real life throttle halfway open the aircraft is going full, and if i slide the real life throttle all the way open it's not doing anything with the extra half of slide ... english is sucky i know.

Throttle: HOTAS X Thrustmaster

That's easily fixed, go into controls > axes > aircraft > throttle and look for those sliders on the bottom left.

Try adjusting the "100% Position:" until you are satiesfied with the results.

On the Axis control you have to move the "Position 100%" slider to the right. Move it and check the green lines on the right. Try to have a 1:1.

EDIT: posted at same time with baffa

What are your system Specs, what OS are you runnings.. what control changes have you made... are you using the keyboard or a HOTAS.. simple little bits of infomation that would let people help.

Have you read the thread and my posts? :rolleyes: