Official Fulqrum Publishing forum

Official Fulqrum Publishing forum (http://forum.fulqrumpublishing.com/index.php)
-   IL-2 Sturmovik: Cliffs of Dover (http://forum.fulqrumpublishing.com/forumdisplay.php?f=189)
-   -   Il-2 Sturmovik: Cliffs Of Dover Retail Patch v 1.01.14550 (http://forum.fulqrumpublishing.com/showthread.php?t=23002)

Helrza 05-19-2011 02:01 AM

Quote:

Originally Posted by luthier (Post 285193)
This is unintended. Someone is getting murdered tomorrow morning, hot fix is coming right up.

For now please unbind the prop pitch from an axis and bind it to a pushkey, which is not all that unrealistic. Sorry about that!

Rgr mate, make sure u dont make make too much of a mess in the murdering process lol :)

Just so u know, and as stated above by other users, the problem is with the pushkey binding. I remmaped the the throttle to use the PP instead and it does indeed work as normal as others have said. (up= pp down, center=nuetral, down= pp up)

Thats ok, im happy to leave it like that for now, since ive been using prop pitch more than throttle anyways :) thanks for the quick acknowledgment mate :)

SG1_Lud 05-19-2011 02:03 AM

Quote:

Originally Posted by Blackdog_kt (Post 285226)

Interestingly enough, if it worked as intended it would be hard to use it with a slider: any position except the slider being centered should give a constant pitch change.


Hey Blackdog ,)

The programmer left a big central dead zone, I am using a G940, it has two thottles. The most left is what I was using as pp. I was lazy to change it for a button so I kept it. :D

And now all i have to do is push to the top forward to pitch down, and the opposite to pitch up, returning to the center to stop the "motor", and as the center is big, I dont need to be precise.

Hope it makes sense now.

Tempered 05-19-2011 02:06 AM

Quote:

Originally Posted by ReconNZ (Post 285206)
Hi Luthier,

Thanks for your time and hard work - this doesnt work though - the plane loadouts have been faulty in the QMB since launch - you can select tracers etc, but they dont work in the missions - they seem to work ok in MP, but the QMB plane fitout doesnt work.

Also you can select plane weathering, squadron numbers etc, but they dont show up when flying - either in MP or QMB - both elements are broken.

Can you please confirm that this is the same for you, not just on my system? Thanks, it's a big emersion killer for those of us whos systems run this ok.

You can change your ammo load out by going to the options screen from the main menu, select plane, select the type of plane you want to change load out on, change your load out, save under a new name. It will now become your load out for that plane. It has worked this way for me since the original version release.

Lololopoulos 05-19-2011 02:07 AM

Thanks Dev team!!! you have my continued support!!

kakkola 05-19-2011 02:21 AM

Ok Luthier,
My first post was mean sorry about that!!!!
I deleted the 1c folder under user/my document/ etc,after that i remapped my joystick and other commands on key bord etc,and now i have pretty good performance on land40-60fps vsync on(not great but decent)
I`ll buy the us version in 2 month or so, hoping for other patches to improve the sim!The russian version is hard to work with(my russian is not that great you know)!!
Thx!!!

Win 7
Phenom x4 965 3.4ghz
gtx 570 1280 mb
8 gig ram

Stealth_Eagle 05-19-2011 02:22 AM

Luthier, Oleg, and the rest of the team, I thank you greatly for all your massive dedication to this game. You work harder and with less resources then most other game genres. I am presently in the US, waiting patiently for the release for extreme lengths of time. I will be patient as before and I understand why you will not release it to the US market yet. Most people will ask me that why don't I just buy from justflight. The reason is I already pre-ordered via Steam. I also have recently upgraded my PC to 8 gigs of ram, Nivdia 480, and some other quite essential upgrades like 64 bit Windows 7. I plan to purchase TrackIR in the near future for this game as well as others. I will remain patient until the release occurs and take it and fly in it with great joy and satisfaction.

Most people are complaining heavily about how the release version initially turned out. Fact is, the very first IL-2 was much more glitched than this when it originally came out so I don't like their complaining. Yes I have been in this series since the beginning but something quite funny occurred to me. I have only begun recently to read the forums and I didn't know 4.09 was out till the November of last year. I was surprised to discover that there was continual work still going on in IL-2 patches. Once 4.10 came out, I finally wanted to play online which somehow I found out how to and now I regularly partake in online matches. The game has gone incredible far from where it started to where it is now.

IL-2 has always been my favorite game due to limitless possibilities. I have and will always fly mod free to enjoy the unaltered game you have created. I will always be a fan of IL-2, no matter how much it has changed and now I wait patiently as I have been for other releases for the release of IL-2 Cliffs of Dover. My one and onlyrequest is that you no longer delay the impending release of this majestic game.

Until the release, I will wait patiently as I can be.
Best regards,
Eagle

timholt 05-19-2011 02:22 AM

After a 40 minute quick test in Hurricane and Spitfire.
Mirrors still not working properly - blank or jagged lines most of the time.
Lost sound when launching one of the new quick missions (to fly the 109) and had to restart game to get it back.
Slight stuttering when around clouds and low down over London.
Every thing maxed out except using High instead of Very High where applicable.
FSSA off - is this a full screen switch?

Blackdog_kt 05-19-2011 02:31 AM

Quote:

Originally Posted by cheyennepilot (Post 285238)
Hey Blackdog ,)

The programmer left a big central dead zone, I am using a G940, it has two thottles. The most left is what I was using as pp. I was lazy to change it for a button so I kept it. :D

And now all i have to do is push to the top forward to pitch down, and the opposite to pitch up, returning to the center to stop the "motor", and as the center is big, I dont need to be precise.

Hope it makes sense now.

Pretty elegant solution then. I suppose this is specific to the DB equipped aircraft and it has no deadzone when flying aircraft with a constant speed prop that need the full range of motion.

A lot of the confusion with controls stems exactly from this fact. In IL2:1946 the controls all behaved the same, in CoD they work just like they did in the real aircraft. This confuses a lot of people and it also causes bugs (like in this case) because the same control has to be custom-coded for each separate aircraft.

I still prefer it over the old system though and once the remaining bugs are taken care off (a small list of 5-7 or so) it will be perfect, really gives a sense of individual character to each aircraft.


Quote:

Originally Posted by Tempered (Post 285241)
You can change your ammo load out by going to the options screen from the main menu, select plane, select the type of plane you want to change load out on, change your load out, save under a new name. It will now become your load out for that plane. It has worked this way for me since the original version release.

Pretty much how it works for me too. The confusion comes from the fact that you need to save at each individual options screen.

Example: Let's say i want to make a loadout with two SC250 bombs, 50% fuel and a custom ammo belt and convergence for the Bf-110C-7.
I need to first set the fuel and bombs on the first screen and save. Then i have to edit the guns for convergence and ammo belt and save in the second screen. Finally, i have to select my bomb fusing options in the last screen and save again.

If i save all of them with the same name they don't overwrite each other, because each screen is about a different part of the loadout.

So, if save each step with a name like "50%fuel,2xSC250" i can go into the quick mission builder and actually select this loadout for my entire flight and it will include ALL of the changes i made.

If i only want to individually customize my own aircraft, i can just change things and click ok on each loadout screen once again by pressing the "player plane" button in the briefing screen before i press "fly". In this case i think it's not even necessary to save as long as i press "ok", because selecting loadouts from the briefing screen prior to spawning seems to over-ride all other options, ie the loadouts work everytime for me if i set them from there.

Hope it helps.

ATAG_Doc 05-19-2011 02:52 AM

I didn't know that. Thanks for the info.

recoilfx 05-19-2011 03:14 AM

Running on catalyst 11.5
i2500k/8gb/Radeon 6950.
Windows 7 64 bit.
Catalyst A.I. set to quality.
1920x1200
Pesudo Full screen mode, everything set to max except building and trees set to high (to prevent stutter).

Observations:
VYSNC must be on to prevent stutters.
Buildings flicker if set to unlimited on highly populated area (London and French coast).
Occasional block/corruption on land
3 horizon stripes still there
Mirrors still broken

Other than that I had to turn down trees and buildings a notch, everything is smooth. Didn't really notice visual differences except at London where there are more brown (untextured) building pop-ups.


All times are GMT. The time now is 05:42 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.