Help on Lan setting

[wannabetheace]

Hey guys, need some help to play via LAN.
Is there any step by step tutorial to set up lan play.
It is not clear how to set up lan server and how to join the server.
Condition: No interent, only connected 2 pc via cross utp cable. or more than 2 pc via lan using switch.

[KG26_Alpha]

Hi

Assuming you know how to start the mission Server/host IL2 PC

Joining via lan or IP.

Start IL2 > Multiplay > join server > enter ip and port or server/host PC.

Example of the ports and ip's

Server/host uses
port 21000
ip 192.168.x.xx1

Client uses
port 21001
ip 192.168.x.xx2

[wannabetheace]

Thanks for reply :)
Hi


Start IL2 > Multiplay > join server > enter ip and port or server/host PC.

Example of the ports and ip's

Server/host uses
port 21000
ip 192.168.x.xx1

Client uses
port 21001
ip 192.168.x.xx2


As I anderstand I should enter in join server as server ip:server port from client. which is "129.69.180.60:21001"
Is it right in this case:

server: ip 129.69.180.60 port 21000
client: ip 129.69.180.61 port 21001

or I could write in the join server from client like

"129.69.180.60:21001"
"129.69.180.60:21000"
"129.69.180.61:21001"
"129.69.180.61:21000"
I've tried this one "129.69.180.60:21000" but it was not working on the client pc's join server window.The client pc had same port with server 21000.
which one is correct input?:confused:

[KG26_Alpha]

Connecting via Lan you need the internal IP of the server these are always usually 192.168.x.xxx (x being variable numbers)

Using direct cable connection you need to assign each PC with an internal ip address.

Find you internal IP's on both PC by going to:

Start>Run>CMD>ipconfig /all

This should show you the internal ip's assigned to each PC.



You can start the client IL2 1946

Multiplay>Join Server>Search local Servers>Enter the port.

Simply entering the port alone the client IL21946 will scan for the hosted port.

In the search local servers bar you can try different ports there 21001 21000 etc to find the server.

[wannabetheace]

Hey, Thanks man!
I really appreciate ur help.
When I play Il2 next time I'll try this one and I'll report to u.:)

[wannabetheace]

Hey man, It finally works with ur help :)

configurations:
server: ip 129.254.84.xx port 21000

client: ip 129.254.84.yy port 21001

server pc created the muliplayer server and client pc joined server pc puting the server_ip:server_port in join window which is "129.254.84.xx:21000".

LoL, now I can enjoy il2 with my friend:cool:

Again Thanks a lot.....

[KG26_Alpha]

No problem

And well done :)

[MaXMhZ]

Thanks for reply :)



As I anderstand I should enter in join server as server ip:server port from client. which is "129.69.180.60:21001"
Is it right in this case:

server: ip 129.69.180.60 port 21000
client: ip 129.69.180.61 port 21001

or I could write in the join server from client like

"129.69.180.60:21001"
"129.69.180.60:21000"
"129.69.180.61:21001"
"129.69.180.61:21000"
I've tried this one "129.69.180.60:21000" but it was not working on the client pc's join server window.The client pc had same port with server 21000.
which one is correct input?:confused:

:) It must be 192.xxx.xxx.xxx:21000 - Firewall(s)must let 21000 UDP protocol through.

Start the server game on the host PC by Multiplay - Create New Server

Then start the game on the client PC(s) and do a Multiplay - Join Server - Search for Local Servers or enter the host PC IP:21000 in the Server Address field.

When playing coops WAIT until all pilots are in their planes before starting the game at the host PC.